Overview
The Method Race Wheels MR705 17×8.5 in Matte Black is a split-spoke aluminum wheel for a 6 on 5.5 bolt pattern, part number MRWMR70578560535. This version is listed with offset 35, backspacing 6.2 and center bore 106. It is part of the MR705 Bead Grip line that Method builds for off-road use with lower tire pressures.
Method’s copy describes Bead Grip as a tire retention design that holds the bead when pressure is reduced, letting the tire flex over loose terrain for more traction and a softer ride. The wheel is marked Universal Fit, so its offset and backspacing matter more than any vehicle name when checking clearance.
Key features
- Patented Bead Grip technology for extra grip at low tire pressures.
- Solid A356 aluminum with T6 heat treatment.
- Split 5-spoke design with 10 windows and a debossed METHOD logo.
- Bead-seat safety hump intended to limit de-beading, which Method calls aggressive.
- Reinforced inner lip that Method says draws on its MRW race wheel.
- Snap-in cap stamped with the METHOD Bead Grip logo in relief.
- Push-through cap with the same logo, for 8-lug applications.
- Rated 2650 lbs. to 3640 lbs.
Offset and clearance checks
Offset controls where the wheel face sits relative to the hub mounting surface. A positive offset pulls the face toward the fender, while a lower number pushes it inward toward the suspension and brakes. Before ordering, compare the offset and backspacing with the wheel you currently run, and note any difference in how far the tire will move in or out.
Once mounted, turn the wheel lock to lock and watch for rubbing at the tire edge, the caliper and any steering linkage. Clearance can change again when the suspension flexes off road, so recheck after the first few trips over uneven ground and after any lift or spacer change.
A tire shop can help with fitment questions, and a hub-centric ring can fix a bore mismatch, but offset is harder to correct later. Measure before buying, and keep notes on the offset and backspacing you choose so future upgrades are easier to plan.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70578560535 |
| Series | MR705 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 35 |
| Center bore | 106 |
| Backspacing | 6.2 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Solid A356 aluminum with T6 heat treatment |
| Load rating | 2650 lbs. to 3640 lbs. |
Vehicle fitment
The wheel is Universal Fit, with hub-centric fitments for common applications. Offset 35 and backspacing 6.2 set how far the wheel sits, so check fender, caliper and steering clearance before ordering. Match the 6 on 5.5 pattern and 106 bore to your hub.
Verify the year, model and trim that match your vehicle prior to ordering.
Installation notes
A tire shop with Bead Grip experience should seat and inflate the tire, since low-pressure running is the purpose of this design. Recheck clearance after mounting, because the 35 offset moves the wheel’s face relative to the hub.
What’s included
A snap-in cap with the METHOD Bead Grip logo is part of the wheel. Plan to source tires, lug nuts and valve stems separately.












