Overview
The Method Race Wheels 304 Double Standard MRWMR30421080518N is a 20 inch by 10 inch aluminum spoke wheel in matte black with an 8 on 6.5 bolt pattern. It belongs to the MR304 Double Standard series and has a -18 offset with 4.76 backspacing. Verify the bolt pattern and offset before choosing it.
Method’s stated design goals for the series are lower weight and higher strength, reached through finite element analysis and field testing. Before choosing this 131 center bore wheel, measure your hub and confirm that the -18 offset leaves room for brake calipers and the fender.
Key features
- Matte black finish on an aluminum spoke wheel
- 20 inch diameter and 10 inch width
- 8 on 6.5 bolt pattern with a 131 center bore
- Negative offset of -18
- Backspacing of 4.76
- Part of the MR304 Double Standard series
- The wheel is designed for off-road racing use.
Before you mount wheels
Offset and backspacing decide where the wheel sits relative to the hub and fender. A negative offset pushes the face outward, which can improve stance but reduces room between the wheel and the suspension, steering parts and brake calipers. Backspacing shows the same relationship from the back side of the wheel and is useful when comparing a new wheel with the one it replaces.
Tire choice matters as much as wheel choice. A wider wheel changes the tire’s sidewall profile and can touch the fender at full steering lock or suspension travel. Off-road drivers often replace the tires at the same time as the wheels, and they check tire clearance again after any lift or suspension change.
- Compare backspacing with the current wheel
- Check brake caliper clearance with the new wheel fitted
- Test steering lock with a load in the vehicle
- Re-check clearance after suspension changes
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30421080518N |
| Series | MR304 Double Standard |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Matte Black |
| Wheel diameter | 20 Inches |
| Wheel width | 10 Inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | -18 |
| Backspacing | 4.76 |
Vehicle fitment
Wheel fit depends on bolt pattern, center bore and offset together. Match the 8 on 6.5 pattern and 131 bore to your hub, and check brake caliper and fender clearance before mounting.
The 8 on 6.5 pattern is not shared by every 20 inch wheel, so a size match alone does not establish fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the wheel on the hub and confirm the 131 bore seats cleanly before torquing. Choose lug nuts that match the wheel’s seat type. Heavy 20 inch wheels should be handled with a proper lift and stands, not a jack alone.
What’s included
The package is one 20 x 10 inch wheel in matte black.
Not included: Tires, lug nuts and center caps are not part of this item.










