Overview
The Kleinn Train Horns Dual Truck Horn – 102 is a dual air horn kit that produces a high pitched blast from two chrome plated spun copper trumpets. Air horns like this run on compressed air, so the kit needs an air compressor and air tank that are not included.
The horn is universal fit, so it is not built for one specific make, model or year. Mounting space and air line routing depend on the vehicle it is installed on.
Key features
- Dual trumpets in chrome plated spun copper
- High pitched air horn sound, with a stated output of 146 dB at 100 psi and 153.5 dB at 150 psi
- Vortex 4 12-volt DC solenoid
- Maximum input pressure of 175 psi
- Universal fit, not tied to a specific vehicle
Setting up air horns
Air horns rely on a steady supply of compressed air, so performance depends as much on the compressor and tank as on the trumpets. Choose a compressor that can keep up with the horn’s demand and mount the tank where it is protected from debris. Keep the air lines short and free of sharp bends so pressure reaches the horns cleanly.
The solenoid switches the air flow, so its wiring should be protected from water and heat. Check the connections periodically for corrosion and tighten the mounting hardware after the first few drives. Chrome plated trumpets can be cleaned with mild soap, and polishing helps keep the finish from dulling.
- Size the compressor to the horn
- Use short, straight air lines
- Protect solenoid wiring from water
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Model | 102 |
| UPC | 854508003014 |
| Horn type | Dual truck air horn |
| Material and finish | Chrome plated spun copper |
| Maximum input | 175 psi |
| Output at 100 psi | 146 dB |
| Output at 150 psi | 153.5 dB |
| Solenoid | Vortex 4, 12-volt DC |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit horn, not vehicle-specific.
Because no vehicle list is published for this horn, do not assume it matches a particular generation or model. Measure the mounting area before drilling.
Installation notes
The horns need compressed air from a compressor and air tank that you supply, and the Vortex 4 solenoid runs on 12-volt DC power. Plan the air line and power wiring before mounting the trumpets. Disconnect the battery before working on the 12-volt wiring.
What’s included
The dual horn assembly with a Vortex 4 12-volt DC solenoid.
Not included: air compressor and air tank, which must be sourced separately.












