Overview
The Kleinn Onboard Air and Train Horn System, part number K/AVELO15-230, is a vehicle-specific onboard air system for the 2015-2021 Ford F-150. It mounts a heavy-duty Kleinn air compressor and a 3 gallon air tank on a custom Made in the USA bracket.
The system is 100% bolt-on with no drilling or modifications. The direct fit kit includes the air line, hardware and fittings, plus a wiring harness made for the aluminum-bodied F-150.
Key features
- 100% bolt-on design with no drilling or modifications.
- Heavy-duty Kleinn air compressor
- 3 gallon air tank
- Custom Made in the USA mounting bracket
- Quick disconnect tire inflator kit with storage bag
- Wiring harness designed for the aluminum-bodied F-150
Keeping the air system healthy
An onboard air system works hardest when the compressor runs for longer stretches, so it helps to keep the tank drained and the intake clear of dust. Moisture collects in air tanks over time, and draining it at regular intervals keeps water out of the air line and tire inflator. Walk the air line after each few trail runs and check that clamps and fittings still hold firm, since vibration loosens connections gradually.
Electrical connections deserve the same attention. Look at the wiring harness where it passes near moving parts or heat, and make sure the connector stays locked. A weak ground often shows up as a compressor that sounds strained or cuts out early under load. Keeping the quick disconnect fittings clean and capped when not in use also prevents dirt from reaching the inflator hose.
- Drain the tank after wet trips
- Inspect the air line after rough trails
- Check connector seals for moisture
- Keep the compressor intake clear of debris
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Part number | K/AVELO15-230 |
| Air compressor | Kleinn heavy-duty |
| Air tank | 3 gallon |
| Mounting bracket | Custom, Made in the USA |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015-2021 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL and XLT trims.
It is designed for the aluminum-bodied F-150, so earlier F-150 model years are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
This system will not work with aftermarket powered side-steps, so check the side steps on your truck before installing. The wiring harness and air line come with the bolt-on kit.
What’s included
Heavy-duty Kleinn air compressor, 3 gallon air tank, custom mounting bracket, air line, hardware and fittings, wiring harness, and a quick disconnect tire inflator kit with storage bag.














