Overview
The Kleinn Train Horns Ultra BlastMaster Upgrade Kit, part number K/A6885, is an add-on kit for the Model 230 Beast train horn. It provides the parts needed to add two VX6003 solenoid valves to a Model 230 Beast, giving each trumpet its own dedicated air source. The kit is for owners of Model 230 Beast horns, not for general vehicle use.
The added solenoids increase air flow, which helps a Model 230 Beast reach higher decibel levels.
The upgrade is meant for horns fitted with the Vortex 6 all brass solenoid valve. Kleinn Train Horns upgraded the Model 230 horns to that valve in 2017, so owners of older Model 230 horns should check their valve before using this kit.
Key features
- Adds two VX6003 solenoid valves to a Model 230 Beast train horn
- Each trumpet gets a dedicated air source.
- Designed to increase air flow for higher output
- Built for Model 230 horns with the Vortex 6 brass solenoid valve
- An upgrade kit, not a complete train horn
Air supply and valve care
Solenoid valves control the air that reaches each trumpet, so their condition affects how the horn responds. When two valves supply separate air sources, each trumpet can respond on its own. Keep the valve seats and sealing surfaces clean, and avoid dropping or stressing the valve bodies during handling. Confirm the air supply is dry and the lines are tight before testing the horn.
Wiring and mounting need the same care. Route the valve wires away from heat and moving parts, and use connectors that resist moisture. Check the mounting bracket for cracks after the first few drives, since vibration can loosen parts over time. A horn that sounds weak, delayed or uneven can point to a valve, air leak or moisture issue worth inspecting before replacing other parts.
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Part number | K/A6885 |
| Compatible horn | Model 230 Beast train horn |
| Solenoid valves added | Two VX6003 solenoid valves |
| Required valve | Vortex 6 all brass solenoid valve |
| Valve upgrade year on Model 230 horns | 2017 |
| Fitment | Universal Fit |
Vehicle fitment
The kit is a universal fit, but compatibility depends on the horn model and its valve type, not on the vehicle.
Compatibility is with Model 230 horns that have the Vortex 6 all brass valve, not with a vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the valve before starting, since the kit suits Model 230 horns with the all brass Vortex 6 solenoid valve. The carton shows a picture of that valve, which helps confirm your horn before you buy. Plan mounting and wiring separately.
What’s included
The kit provides the parts needed to add two VX6003 solenoid valves to a Model 230 Beast train horn.
Not included: the Model 230 Beast train horn itself, which this kit upgrades.









