Overview
The Icon Suspension 218550 is a tubular upper control arm kit for the Dodge Ram 1500, built for 2WD and 4WD trucks from 2009 onward. It uses 1 inch PTFE lined Uniballs and 17-4 stainless taper pin adapters to increase upper arm misalignment and reduce factory ball joint bind.
The arms are designed for use with Icon’s 2.5 inch VS Series performance coil-over shocks, where weak factory ball joints can limit suspension travel.
Key features
- Tubular upper arm system
- 1026 DOM seamless tubing
- CNC bent arms
- 4130 CNC machined Uniball cup
- 1 inch PTFE lined Uniballs
- 17-4 stainless taper pin adapters
How the upper arms work
The upper control arm locates the top of the wheel and controls how it moves over bumps and through droop. When a factory ball joint binds, the wheel cannot cycle freely, and travel stops well before the shock reaches the end of its stroke. A Uniball on a taper pin adapter lets the arm move through a wider range, so the suspension can use more of the travel it already has.
Changing the upper arm changes caster and camber, so have the alignment checked once the arms are in. Before removing the old parts, inspect the factory ball joints to see whether they were the limiting factor. Look for torn boots, play and stiff movement. Recheck every fastener after the first few drives, since new joints can settle.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 218550 |
| UPC | 70000639814 |
| Position | Upper |
| Tubing | 1026 DOM seamless |
| Uniball cup | 4130 CNC machined |
| Uniball | 1 inch PTFE lined |
| Taper pin adapters | 17-4 stainless steel |
| Drive | 2WD and 4WD |
Vehicle fitment
The manufacturer fitment list gives 2009–2010 Dodge Ram 1500 and 2011–2017 Ram 1500 across the trims on the list, including Laramie, SLT, Rebel and TRX4.
The arms fit Ram 1500 models from 2009 through 2017. Ram 1500 years after 2017 and heavier Ram models are not covered. Make sure your year, model and trim are covered before ordering.
Installation notes
Because the arms use taper pin adapters instead of the factory ball joint, have the alignment checked after installation.
What’s included
The kit includes the tubular upper arms with 1 inch PTFE lined Uniballs and 17-4 stainless taper pin adapters. Compare what arrives with your installation plan before starting.
