Overview
The Hutchinson D.O.T. beadlock wheel is a 17 by 8.5 inch aluminum wheel with an 8 on 6.5 bolt pattern and an Argent finish, sold under the Rock Monster series with part number HUT60669-023-1. It is a beadlock wheel, so it is built for lower tire pressure off-road.
Lower tire pressure widens the tire footprint in soft terrain such as sand, mud or snow. Tires can roll off a standard rim at low pressure, though, so a beadlock wheel uses a locking device to hold the tire bead to the rim. Hutchinson says its design allows internal beadlocks and keeps the wheels street legal.
A beadlock clamps the tire bead to the rim so the tire stays seated when the pressure is low. That is the purpose of the internal lock on this wheel, and the function only works when the locks are set and the tire is mounted correctly.
An 8 on 6.5 pattern means eight lug holes spaced on a 6.5 bolt circle. The wheel has a 0 offset, which is the distance from the mounting face to the wheel centerline, and 4.5 backspacing, which is the distance from the mounting face to the back edge of the wheel. Both measurements affect clearance against brakes, suspension and fenders.
Key features
- Internal beadlock design, which Hutchinson says keeps the wheels street legal
- Aluminum construction in a beadlock style
- 17 inch diameter and 8.5 inch width
- 8 on 6.5 bolt pattern with a 122 center bore
- Argent finish
Before running low pressure
Running low pressure only makes sense once the tire is locked to the rim. Set the bead locks with the tire fully seated, then check that the bead line is even all the way around before airing down. A loose bead at low pressure can let the tire come off the rim in the middle of a turn.
Wheel offset and backspacing change how the wheel sits relative to the hub, brake components and fender. If the tire is wider or taller than the original, the change can move the outer edge closer to the fender or suspension. Test clearance at full steering lock and under suspension compression before heading out.
- Check bead lock hardware before each run
- Verify clearance at full steering lock
- Recheck tire pressure after airing down
Specifications
| Brand | Hutchinson Wheels (Rock Monster series) |
|---|---|
| Part number | HUT60669-023-1 |
| Style | Beadlock |
| Diameter | 17 inches |
| Width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 122 (unit not stated) |
| Offset | 0 |
| Backspacing | 4.5 |
| Construction | Aluminum |
| Finish | Argent |
| Fitment | Universal fit label; no vehicle named |
Vehicle fitment
No vehicle is named for this wheel. The manufacturer labels it universal fit, which means the wheel is not matched to a specific vehicle. Fit depends on the bolt pattern, center bore, offset and backspacing, along with the tire size and the clearance behind the wheel.
Bolt pattern, center bore, offset and backspacing decide whether a wheel clears a hub and brakes, so compare them with your vehicle’s specifications. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Beadlock wheels need a working bead locking device to hold the tire on the rim at low pressure, so set the locks before running low pressure.
What’s included
One beadlock wheel. Check the package contents for tires, valve stems and beadlock hardware before installing.











