Overview
The FUEL Off-Road Rebel 8 D679 in 22 by 12 inches carries part number MHTD67922208247 and is built for an 8 on 6.5 bolt pattern. This matte black aluminum split spoke wheel is a 22 inch option for owners whose hub uses 8 on 6.5 lug holes.
Offset -44, backspacing 4.8 and center bore 125 are the measurements to check against your hub. Matte black is the finish, and the wheel is aluminum with a split spoke design.
Key features
- 8 on 6.5 bolt pattern
- Matte black finish
- Aluminum split spoke design
- 22 by 12 inch size
- Offset -44
- Center bore 125 and backspacing 4.8
Split spoke wheels in use
Split spoke designs have separate spokes, which leave visible gaps through which the brake area can be seen. They tend to shed mud and grit more easily than a solid spoke layout, but the gaps still need rinsing after off-road runs. The 22-inch size with a 12-inch width changes the tire options, so choose a tire with the correct overall diameter to keep speedometer readings accurate.
Matte black aluminum shows scuffs and chips as lighter spots, so touch-up paint is worth keeping on hand. A split spoke wheel carries the same stud and bearing loads as any wheel of its size. Check the lug nuts after the first few drives, and look at the mounting face for dirt before every tire change.
- Rinse out mud from the spoke gaps
- Keep touch-up paint for chips
- Check nut torque after the first few drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD67922208247 |
| Model code | D679 |
| Wheel diameter | 22 inches |
| Wheel width | 12 inches |
| Bolt pattern | 8 on 6.5 |
| Offset | -44 |
| Center bore | 125 |
| Backspacing | 4.8 |
| Style | Split spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
This wheel is marked Universal Fit and names no vehicle, so no model year or trim is confirmed. Compare the 8 on 6.5 pattern and 125 center bore with your hub, and check that the -44 offset clears your brakes.
The 8 on 6.5 pattern is the first check, since a hub with a different bolt count or spacing will not take this wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Seat the 125 center bore fully on the hub face, then tighten the lug nuts in a crisscross order once the wheel sits flat. Recheck the nuts after a short drive, and inspect the matte finish for chips after mounting.
What’s included
Confirm the lug nut and center cap needs for your setup before ordering.
Not included: Tire.











