Overview
The G2 Axle and Gear 2-2058-488 is a 4.88 ratio ring and pinion for the rear Toyota Tacoma 8 inch axle. The pinion turns 4.88 times for each ring gear revolution, a numerically high ratio that multiplies torque at the wheels and suits larger tires.
This 4.88 set is made for the rear Toyota Tacoma 8 inch axle. G2’s Performance line is designed for oversized tires and high-performance engines. Measure the axle and ring gear on your vehicle before ordering.
Key features
- 4.88 gear ratio for the rear Toyota Tacoma 8 inch axle
- Rear axle location
- Ring gear and pinion supplied as a matched set
- Built for oversized tires and high-performance engines.
- Built with current materials and manufacturing methods.
Towing and tire size considerations
A 4.88 ratio is a common choice for trucks that run larger tires or tow. The pinion turning more times per ring gear turn gives stronger launch and better control on steep grades, while engine speed rises at highway speed. Think about how the truck is mostly used, and whether the tires have grown from stock, before settling on the ratio.
Gear work is best handled as a full package. New gears often wear together with the pinion bearings, carrier bearings and pinion seal, so inspect those parts while the axle is open. Check the fluid for fine metal particles after the first few drives, and keep an eye on noise during light throttle and coast.
Choosing a gear shop for setup matters because pinion depth and backlash affect how long the gears last. A quiet, even tooth pattern is the goal, and it is worth taking the time to confirm it before the truck returns to regular use.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2058-488 |
| Axle type | Toyota Tacoma, 8 inch (per title) |
| Axle location | Rear |
| Gear ratio | 4.88 |
| Axle manufacturer | Toyota |
Vehicle fitment
Measure the rear axle and ring gear on your truck. Confirm the 8 inch size before ordering, since the set is made for that axle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and carrier preload need measured setup, so a gear shop is the practical installer. Plan for a break-in run afterward.
What’s included
One 4.88 ring and pinion set for the rear Toyota Tacoma 8 inch axle, part number 2-2058-488.
Not included: Carrier bearings, shims and installation hardware.
















