Overview
The G2 Toyota FJ60 Front Chromoly CV Axle Kit, part number 98-2044-004, is a front axle shaft kit for Toyota axles listed at 9.5 inches with 30 splines. G2 made it as a replacement for owners running oversized tires and the high torque of low geared vehicles.
The shafts are forged from high tensile strength 4340 alloy. G2 says extra material around the yoke at the u-joint cap prevents distortion that can damage bearings, and that the design addresses weak areas of the original shaft. The kit comes without a differential.
Key features
- 4340 chrome/nickel (Chromoly) alloy construction
- Forged from high tensile strength 4340 alloy
- Extra yoke material around the u-joint cap to prevent distortion
- Designed for high torque from ultra low gearing
- Built for oversized tires.
- Front axle location
Low gearing and yoke wear
Ultra low gearing multiplies torque at the axle, which keeps the shaft working hard on steep climbs and slow crawls. A yoke that flexes can pull the u-joint out of alignment and wear bearings early. The extra material around the yoke in this design resists that movement, but the joint still needs regular checks.
After installation, look at the u-joint caps for play and confirm the yoke sits square to the shaft. Retighten any fasteners after the first few trail runs, since new hardware can settle. Keep the axle breather clear so the housing does not build pressure and push seals out.
- Check u-joint caps for side play
- Confirm yoke alignment before the first drive
- Inspect the axle seal after steep trail use
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2044-004 |
| UPC | 631410111729 |
| Axle location | Front |
| Axle type | Toyota 9.5 inches |
| Axle spline | 30 splines |
| Popular axle manufacturer | Toyota |
| Material | 4340 chrome/nickel (Chromoly) alloy |
| Includes differential | None |
Vehicle fitment
The title’s Toyota FJ60 wording is the only fit reference, with no model years or chassis code. Match your year, model and trim to the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering. Compare the 30-spline count and 9.5-inch axle type with the axle your vehicle already has.
What’s included
This is a front axle shaft kit with no differential.
Not included: differential.











