Overview
The G2 Axle and Gear 97-2041-004 is a chromoly Birfield CV style inner axle shaft for the passenger side of the front axle on 1980–1985 Toyota Pickup trucks.
The 97-2041-004 is the short passenger-side companion to the long driver-side shaft, with 27 splines and sized for the Toyota 8 inch front axle. It is chromoly and applies to the 79-85 Toyota P/U application.
On many front-drive Toyota trucks the two inner shafts differ in length because the differential sits off center. That is why the passenger-side shaft is sold separately and is shorter, and the driver-side shaft will not substitute. The chromoly construction is intended for trail use, and the 27 splines mate with the Toyota 8 inch axle.
Key features
- Passenger-side short inner axle shaft
- Front right inner position
- 27 splines
- Chromoly construction
- Birfield CV style for the Toyota 8 inch front axle
- Covers the Toyota Pickup
Long versus short inner shafts
Because the two inner shafts on many front-drive trucks differ in length, the passenger-side shaft is a separate part and must be matched to the correct side before any assembly. Mixing up the short and long shafts causes fit problems and can damage the joints. Labeling the old parts as they come out makes the new installation easier to check.
Chromoly is common in driveline shafts, but the joint, the retainer and the differential seal still need regular checks. A shaft that feels tight in the joint or shows spline wear should be replaced before it fails on the trail. Keep a spare retainer clip and grease on hand for the job.
- Label old shafts by side
- Check the joint for play
- Inspect the differential seal
- Keep a spare retainer clip
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2041-004 |
| UPC | 631410107517 |
| Part type | Inner axle shaft, Birfield CV style |
| Material | Chromoly |
| Axle location | Front |
| Shaft position | Passenger side, front right inner |
| Axle type | Toyota 8 inch |
| Spline count | 27 splines |
| Shaft length | Short axle |
Vehicle fitment
It fits the 1980–1985 Toyota Pickup only. The application begins at 1979, so owners of a 1979 truck should confirm fit against their build year.
Toyota Land Cruisers and Pickups built after 1985 are outside the list, and the driver-side shaft is longer and carries its own part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is the short side, make sure you are not mixing it up with the longer driver shaft when the front axle is apart. Compare spline counts with the mating parts before pressing anything together.
















