Overview
The G2 Axle and Gear 98-2032-003 is a Dana 30 front chromoly axle kit with 30 splines for narrow track Jeep CJ models from 1972 to 1981, including the CJ5, CJ6 and CJ7.
Older narrow track CJs can use this 30 spline option with a 30 spline aftermarket differential. No differential is in the box. The shafts are forged from 4340 chrome and nickel alloy, and the kit suits off-road use with oversized tires and very low gearing. The application is 76-81 CJ narrow track.
These shafts suit older narrow track CJs, where the front axle is physically narrower than on the wide track trucks that followed. Choosing the wrong track width means the shafts will not reach, so the year and track width must be confirmed together. The 30 spline count means a matching aftermarket differential is needed, which G2 says is not part of the kit.
Key features
- Dana 30 front axle kit in chromoly
- 30 splines
- For use with a 30 spline aftermarket differential
- Narrow track CJ application
- No differential included
- Extra yoke material around the U-joint cap.
Narrow track fitment basics
Narrow track CJs use a front axle that is physically narrower than the wide track trucks, so shaft length and housing geometry are not interchangeable. Measure the track width and confirm the model year before buying a kit, since a shaft that does not reach will cause fit problems that are hard to correct. Keep the axle tag and VIN ready when comparing parts.
Older CJs often have years of trail use behind them, so the axle housing, bearings and seals deserve inspection before a new shaft set goes in. A 30 spline setup depends on a matched differential, and a worn differential can damage new shafts quickly. Check for cracks around the housing and any oil seepage at the pinion and axle seals.
Oversized tires and low gearing increase the stress on axle shafts, which is why owners with those setups often upgrade the differential as well. Plan the shaft, differential and bearings as one package, and keep spare clips and seals on hand during the project.
- Match track width before ordering
- Inspect bearings and seals before assembly
- Confirm the differential spline count
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2032-003 |
| UPC | 631410097474 |
| Part type | Front axle kit |
| Material | Chromoly (4340 alloy) |
| Axle | Dana 30 |
| Axle location | Front |
| Spline count | 30 splines |
| Differential pairing | 30 spline aftermarket differential |
| Track width | CJ narrow track |
| Differential included | None |
Vehicle fitment
It fits the 1972–1975 Jeep CJ5 and CJ6, the 1976–1981 CJ7 and the 1981 Scrambler. The application is 76-81 CJ narrow track, so check the year on an early CJ5 or CJ6.
Wide track CJs from 1982 onward are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 30 spline shafts need a 30 spline differential, which is not included. Lay out the differential and shaft combination before taking the axle apart.








