Overview
The G2 Axle and Gear 97-2041-003 is a chromoly Birfield CV style inner axle shaft for the driver side of the front axle on 1980–1990 Toyota Land Cruiser and 1980–1985 Toyota Pickup models.
The 97-2041-003 is a chromoly Birfield CV style inner axle shaft for the driver side of the front axle, in the front left inner position. It is a long shaft with 27 splines, made for the Toyota 8 inch front axle. It is forged from high grade alloy steel and heat treated beyond OEM specifications, and it applies to the 79-85 Toyota P/U and 8/80-1/90 FJ60 Land Cruiser.
A spline is one of the ridges that lock a shaft to a joint or differential gear, and the count has to agree at both ends. The 27 splines on this shaft match the Toyota 8 inch axle. Because the Land Cruiser and Pickup trucks it covers were built over several years, check the front hub and joint type on your truck before choosing it.
Key features
- Chromoly inner axle shaft in the Birfield CV style
- Driver-side long shaft, front left inner position
- 27 splines
- Made for the Toyota 8 inch front axle
- Aimed at the common weak points G2 sees in factory shafts
- Covers both the Land Cruiser and the Pickup
Inspecting the front hub
On these Toyota trucks, the inner shaft runs between the differential and the hub, so the front hub assembly is part of the job whenever the shaft is replaced. Removing the hub lets you check the bearings, seals and joint condition at the same time. Hub type matters, because mating parts differ between model years, and confirming the hub before buying saves a second trip to the parts counter.
Inspect the splines for wear, the joint boot for tears and the differential seal for leaks while the shaft is out. Keep the spline count in mind when comparing parts. Clean the mating surfaces and install fresh retaining hardware so the new shaft seats correctly.
- Count the splines before pulling the shaft
- Check the hub bearing for play
- Inspect the differential seal for leaks
- Clean mating surfaces before assembly
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2041-003 |
| UPC | 631410107500 |
| Part type | Inner axle shaft, Birfield CV style |
| Material | Chromoly |
| Axle location | Front |
| Shaft position | Driver side, front left inner |
| Axle type | Toyota 8 inch |
| Spline count | 27 splines |
| Shaft length | Long axle |
Vehicle fitment
It fits the 1980–1990 Toyota Land Cruiser and the 1980–1985 Toyota Pickup. The application also reaches back to 1979 for the Pickup and ties the Land Cruiser to the FJ60 built from August 1980 to January 1990, so check the build date of an early truck.
Land Cruisers built before 1980 and Pickups from 1986 onward are not covered, and the passenger-side shaft is a different part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Inner shafts have to mate with the 27 spline joint and differential parts on the Toyota 8 inch axle, so count the splines on your existing shaft before swapping it. Removing the front hub assembly is part of the job on these trucks.
















