Overview
The G2 Axle and Gear 95-2029-002 is a rear replacement axle shaft for the Chrysler 8.25 inch axle in the 1997–2000 Jeep Cherokee XJ. It has 29 splines and a 29.750 inch overall length.
The shaft is forged from high grade alloy steel and heat treated to exceed OEM specifications. It fits either the driver or passenger side.
The 95-2029-002 is a 29.750 inch shaft with 29 splines for the Chrysler 8.25 inch rear axle of the Cherokee XJ, and it fits either side. G2 Axle and Gear describes its shafts as forged from high grade alloy steel and heat treated to exceed OEM specifications. The application comes from G2’s own wording rather than a model list.
Key features
- 29 splines
- 29.750 inch overall length
- Either driver or passenger side
- Chrysler 8.25 inch rear axle
- For the 1997–2000 Cherokee XJ
- Wheel studs not included
Cherokee XJ rear axle notes
The Cherokee XJ with a Chrysler 8.25 inch rear axle is common on trails and in daily driving, so its rear shafts take a steady mix of torque and articulation loads. A replacement shaft is usually chosen by its length, spline count and end type, so measuring the existing shaft before ordering helps avoid a mismatch. Many owners replace the axle seal and bearing at the same time as the shaft.
Signs that a rear shaft is wearing include clicking on turns, vibration under acceleration, and oil leaking at the wheel end. A shaft that has been used on a trail rig may show bent or twisted ends and scored splines. Keep spare wheel studs and lug hardware on hand, since studs are not part of this shaft.
- Measure the existing shaft’s length before buying
- Check spline count and end type against the differential
- Replace the axle seal when the shaft is removed
- Keep spare wheel studs on hand
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2029-002 |
| UPC | 631410106275 |
| Product type | Replacement axle shaft |
| Axle type | Chrysler 8.25 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 29 |
| Overall length | 29.750 inches |
| Wheel studs | Not included |
| Stated application | 1997-2000 Cherokee XJ |
Vehicle fitment
No vehicle list accompanies the 95-2029-002. G2 states 1997–2000 Cherokee XJ, which is the 1997–2000 Jeep Cherokee (XJ).
G2 limits this shaft to 1997–2000. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check your Cherokee has the Chrysler 8.25 inch rear axle.
- Wheel studs are not included.
What’s included
One rear axle shaft that fits either side (95-2029-002).
Not included: wheel studs for the 95-2029-002.





