Overview
The G2 Axle and Gear 97-2041-001 is a chromoly birfield CV-style outer axle shaft for the front axle of the 1979–1985 Toyota Pickup and Land Cruiser. It has 27 splines and fits the driver or passenger side.
The 97-2041-001 applies to the 79-85 Toyota P/U, the 75-84 FJ40 Land Cruiser and the 8/80-1/90 FJ60 Land Cruiser. It is heat treated to exceed OEM specifications.
The 97-2041-001 is a birfield CV-style outer shaft in chromoly with 27 splines, made for the outer stub of the Toyota 8 inch front axle. It fits either the driver or passenger side. Its forged construction is heat treated beyond OEM specifications.
Key features
- Chromoly CV (birfield) joint
- 27 splines
- Either driver or passenger side
- Outer stub, front axle
- Toyota 8 inch axle
- Heat treated beyond OEM specifications.
Signs the outer shaft is worn
An outer axle shaft connects the CV joint at the wheel end to the hub, so wear usually shows up as clicking on tight turns, vibration, or a boot that has torn and leaked grease. Check the CV boot and joint for play before pulling the shaft, because dirt entering through a torn boot wears the joint quickly. On a Toyota 8 inch front axle, the outer stub and hub bearing are often inspected at the same time.
When choosing an outer shaft, the spline count and joint style must match the hub and inner shaft on your truck. Replacing the outer shaft is also a good time to inspect the hub seal and wheel bearings. Using a fresh snap ring and clean grease keeps the joint running smoothly.
- Clicking on sharp turns
- Torn CV boot with grease loss
- Play at the wheel end
- Inner shaft must match the spline count
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2041-001 |
| UPC | 631410107494 |
| Product type | Replacement axle shaft |
| Axle type | Toyota 8 Inch |
| Axle location | Front |
| Shaft position | Outer Stub |
| Spline count | 27 |
| Material | Chromoly |
| Stated application | 79-85 Toyota P/U, 75-84 FJ40 Land Cruiser and 8/80-1/90 FJ60 Land Cruiser |
Vehicle fitment
It fits the 1979–1985 Toyota Land Cruiser and the 1979–1985 Toyota Pickup. Confirm fit for your vehicle’s year, model and trim before ordering.
G2’s text extends the FJ40 back to 1975 and the FJ60 from August 1980 to January 1990, which is wider than the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- This is an outer shaft, so confirm the inner shaft has matching 27 splines.
What’s included
One outer axle shaft (97-2041-001).
Not included: the inner shaft and wheel studs for the 97-2041-001.









