Overview
The G2 Axle and Gear 97-2044-005 is a Big Spline chromoly Birfield CV style inner axle shaft with 30 splines for the passenger side of the front axle on 1975–1990 Toyota Land Cruiser models, including the FJ40 and FJ60.
This long passenger-side shaft is the 30 spline partner for FJ40 and FJ60 Land Cruiser owners who are upgrading the front driveline. It fits the Toyota 9.5 inch axle and needs an aftermarket CV joint. It is chromoly and built for owners who run larger tires.
On an FJ40 or FJ60 front axle, the passenger side is where the second long shaft goes. Anyone upgrading to Big Spline shafts normally does both sides at the same time so the joints and shafts stay matched. The driver-side Big Spline shaft in this family is a different part number, so a full pair means two separate purchases.
Key features
- Big Spline chromoly inner shaft, 30 splines
- Passenger-side long shaft, front right inner position
- Made for the Toyota 9.5 inch front axle
- Needs an aftermarket CV joint
- Covers FJ40 and FJ60 Land Cruisers
- Shaft only
Matching both driveline sides
A passenger-side shaft works best as part of a matched pair. The stock joints, the Big Spline shaft on the other side and the axle housings all share the load, so mixing a 30 spline shaft with a stock joint can leave one side weaker than the other. Confirming the joint count before buying saves a return trip.
Larger tires place extra torque on the shafts, and the spline area is where a shaft is most likely to twist or break under heavy loads. Check the splines and the boot each time the front end is opened, and look for play at the wheel when the vehicle is lifted. Keeping the hubs and bearings in good order helps the new shaft last.
- Verify both sides use matched spline counts
- Check joint boots for splits before assembly
- Torque fasteners to the vehicle’s service specification
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2044-005 |
| UPC | 631410107586 |
| Part type | Big Spline inner axle shaft, Birfield CV style |
| Material | Chromoly |
| Axle location | Front |
| Shaft position | Passenger side, front right inner |
| Axle type | Toyota 9.5 inches |
| Spline count | 30 splines |
| Shaft length | Long axle |
| Requirement | Aftermarket CV joint |
Vehicle fitment
It fits the 1975–1990 Toyota Land Cruiser, covering the FJ40 and the FJ60.
Land Cruisers outside 1975–1990 and all Toyota Pickups are not covered. A driver-side Big Spline shaft is a different part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pair the shaft with a 30 spline aftermarket CV joint, since the joint is required. Have a professional shop confirm the driveline stack before assembly.
What’s included
Not included: The aftermarket CV joint this shaft requires.
















