Overview
The G2 Axle and Gear 98-2041-001 is a Birfield CV style chromoly axle kit with 30 splines for the front axle of 1979–1985 Toyota Pickup trucks.
Toyota truck owners get matched chromoly Birfield CV joints and axle shafts in one kit for the Toyota 8 inch front axle. The outer ends have 30 splines, and so do the driver and passenger inner shafts. G2 says its shafts are heat treated to exceed OEM specifications for extended service life. Its application line reads: for use in 79-85 Toyota P/U and 4runner.
The Birfield joint is the constant velocity joint at the wheel end of the front axle on these Toyotas, and replacing it together with the shafts avoids mixing worn parts with new ones. All of the shafts and joints in this kit are 30 spline, a count G2 pairs with its stronger front axle line. The kit does not include a differential, so check what your axle already has before deciding.
Key features
- Chromoly Birfield CV joints and axle shafts in one kit
- 30 splines at the outer ends
- 30 spline inner shafts on both driver and passenger sides
- Made for the Toyota 8 inch front axle
- No differential included
- Direct fit
Birfield joints and axle service
A Birfield joint is a constant velocity joint that lets the front wheels turn and steer while the drive keeps spinning smoothly. On an older Toyota front axle, worn joints show up as clicking in turns, vibration on acceleration or a grease-smeared inner wheel. Because the joint and the shaft wear together, replacing both at once avoids pairing a fresh shaft with a worn joint.
Front hub and axle nut condition matters just as much. Check the hubs for play, look at the seals for leaks, and confirm the axle nut is tight and secured after installation. If a shaft has been driven with a loose hub, the splines may be damaged, and the new axle will not seat correctly.
Because a differential is not included, inspect the existing unit before the shafts go in. Look for leaks, check the pinion seal, and listen for noise under load. Keeping the CV boots sealed keeps dirt and water out, which is the main reason these joints last on trail trucks.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2041-001 |
| UPC | 631410107654 |
| Part type | Birfield CV style axle kit |
| Material | Chromoly joints and shafts |
| Axle location | Front |
| Axle type | Toyota 8 inch |
| Spline count | 30 splines outer and inner |
| Sides | Driver and passenger |
| Differential included | None |
Vehicle fitment
It fits the 1979–1985 Toyota Pickup and 4Runner models, with the Toyota 8 inch front axle.
Land Cruisers and Pickups built after 1985 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit replaces both the joints and the shafts, so the whole front axle shaft assembly is changed on each side. Check that your hubs and differential use the same spline counts.
What’s included
- Chromoly Birfield CV joints
- Chromoly axle shafts for the driver and passenger sides
Not included: A differential.






