Overview
The G2 Suzuki Birfield CV Style Chromoly Inner Axle Shaft, part number 97-2081-002, is a front inner shaft for the driver side with a Suzuki 6.875 inch axle type and 25 splines. It is a CV style chromoly shaft.
The shaft is forged from high grade alloy steel and heat treated to exceed OEM specifications. Rolled splines and better materials support its high torque design.
Key features
- CV style inner design.
- Chromoly construction.
- Heat treated to exceed OEM specifications.
- Rolled splines for added strength
Checking the old inner shaft
An inner CV shaft carries drive torque from the transaxle or differential out to the front hub, so wear shows up as a change in how the vehicle drives. Clicking or popping during tight turns often points to a worn CV joint. Grease on the inside of the wheel usually means a torn boot. Vibration under acceleration can come from a bent or worn shaft.
Before buying, pull the old shaft and compare the joint shape, boot style and spline count with this one. Matching the splines on both ends matters more than matching overall length alone, because a mismatch will not seat properly or will strip under load.
- Look for grease on the wheel face or inner tire
- Check the splines for rounding or twist marks
- Inspect the joint end for play or roughness
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2081-002 |
| UPC | 631410107470 |
| Axle manufacturer | Other |
| Axle type | Suzuki 6.875 inch |
| Axle location | Front |
| Shaft location | Driver side inner |
| Spline count | 25 splines |
| Material | Chromoly, forged high grade alloy steel, heat treated |
| Fitment category | Universal Fit (as published) |
Vehicle fitment
No vehicle years or models are published for this shaft. The fitment field reads Universal Fit, so match the Suzuki 6.875 inch axle type and the 25 spline count to your vehicle before fitting.
The passenger side inner shaft is a separate part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
CV style inner shafts connect at the joint end, so check the joint shape and spline count of the old shaft against this one before installing.
What’s included
One inner CV style axle shaft for the driver side.
Not included: hubs, bearings, seals or hardware; check these against your installation before starting.












