Select your vehicle

G2 Ford 9 Inch Replacement Axle Shaft – 95-2011-006

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits Ford Bronco 1974–1977 per G2 notes (list: 1974–1975)
  • Ford 9 inch rear driver side shaft, 28 splines
  • 1/2 inch press fit studs not included

Description

Overview

The G2 Axle and Gear 95-2011-006 is a Ford 9 inch rear driver side axle shaft with 28 splines. It takes 1/2 inch press fit wheel studs, which are not included. The shaft is forged from high grade alloy steel and heat treated to exceed OEM specifications.

This driver side shaft has 28 splines on the Ford 9 inch rear axle and uses 1/2 inch press fit studs. Fitment is confirmed for 1974–1975 Ford Bronco models and the 1975 Bronco Sport. The 1976 and 1977 model years are not confirmed for this shaft, so verify those years before ordering. A buyer who needs both sides will need a matching passenger side shaft.

Key features

  • Driver side rear axle shaft for the Ford 9 inch axle
  • 28 splines
  • 1/2 inch press fit wheel studs
  • Forged from high grade alloy steel.
  • Heat treated to exceed OEM specifications.

Checking model years

Bronco model years in the mid 1970s had small changes in trim, axle setup and stud pattern, so a year that falls between two coverage ranges deserves a second look. Pulling the axle tag or the vehicle’s build sheet before ordering helps match the shaft to the correct production year.

Press fit studs are installed by pressing them into the flange, which is a job that often needs a press or a proper stud installer. If the old studs are reused, check them for galling or bent threads, since a damaged stud can pull free under load on the trail.

  • Confirm the axle type before buying
  • Check the stud diameter on the old shaft
  • Inspect the flange for cracks around the studs

Specifications

Brand G2 Axle and Gear
Part number 95-2011-006
UPC 631410105858
Axle manufacturer Ford
Shaft location Driver Side
Axle position Rear
Axle type Ford 9 Inches
Position Rear
Spline count 28 Splines
Wheel stud size 1/2 inch press fit
Material High grade alloy steel, forged
Applications noted 1974-1977 Ford Bronco

Vehicle fitment

It fits 1974–1975 Ford Bronco models and the 1975 Bronco Sport.

  • 1974–1975 Ford Bronco (Base, Custom, Northland, Ranger)
  • 1975 Ford Bronco Sport

It fits 1974–1975 Ford Bronco models and the 1975 Bronco Sport. Earlier Broncos require a different shaft. Make sure your year, model and trim fit the coverage above before you buy.

What’s included

One rear axle shaft.

Not included: wheel studs.

SKU: G/295-2011-006 Category:

Specification

Shipping weight 25.00 lbs
Package dimensions 37.00 × 7.50 × 7.30 in
brands

Fitment

VehicleYearsTrims
Ford Bronco1974–1975Base, Custom, Northland, Ranger
Ford Bronco Sport1975All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What does the G2 95-2011-006 fit?

It is a driver side shaft for the Ford Bronco. It fits 1974–1975 models and the 1975 Bronco Sport. For 1976 and 1977 Broncos, confirm fit before ordering.

What studs does the 95-2011-006 take?

1/2 inch press fit wheel studs, which G2 says are not included, so you will need to source matching studs before installing this shaft.

How many splines does the 95-2011-006 have?

28 splines, on the Ford 9 inch rear axle, for the driver side. The attribute list from G2 gives the position as rear.

Can I reuse my old press fit studs with a new shaft?

Old studs can be reused if they are straight, undamaged and fully seated. Inspect the threads and the shoulder for galling or bending, and replace any stud that shows wear before the shaft goes in.

Why does a rear shaft sometimes vibrate after installation?

A shaft that is not fully seated or has loose studs can cause vibration. Check the retainer bolts, confirm the bearing is properly seated, and recheck the fasteners after the first few drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon