Overview
The G2 Axle and Gear 95-2013-007 is a rear passenger-side replacement axle shaft for the Ford 8.8 inch axle in the 1995–2002 Ford Explorer. It carries 31 splines.
G2 says shafts like this one are meant to cure the faults it sees in factory axles. They are forged from high grade alloy steel, heat treated to exceed OEM specifications, and aimed at drivers who add torque or larger tires to an Explorer.
For Explorer owners, the 95-2013-007 offers a replacement for the passenger-side rear shaft with 31 splines and a design G2 Axle and Gear says exceeds OEM specifications. The company describes its shafts as engineered to withstand more torque than the factory part, which matters on an Explorer that has been regeared or fitted with larger tires. Check the side, the spline count and the model year range before installing, and plan to source wheel studs separately.
Key features
- Passenger-side rear shaft for the Ford 8.8 inch axle
- 31 splines
- Forged alloy steel, heat treated beyond OEM specs
- Rolled splines among G2’s stated design features
- Wheel studs are not included
Keeping the rear axle healthy
A rear axle shaft transmits torque from the differential to the wheel hub, so it carries the full load of acceleration, braking and towing. On a Ford 8.8 inch axle, the splines at the differential end and the flange at the hub end are the two areas that take the most stress. Inspect both whenever the shaft is removed, looking for twisted splines, cracks near the flange and wear marks where the shaft seats.
Shafts are often replaced along with the wheel bearing and seal, because a failing bearing lets the shaft shift and load the splines unevenly. After installation, check the lug nuts after the first few drives and recheck the axle bolts once the truck has been on rough terrain. Fresh gear lubricant and a clean seal area help the new shaft last longer.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2013-007 |
| UPC | 631410105766 |
| Product type | Replacement axle shaft |
| Axle type | Ford 8.8 inch |
| Axle location | Rear |
| Shaft position | Passenger Side |
| Spline count | 31 |
| Wheel studs | Not included |
| Stated application | 1995-2002 Ford Explorer passenger side |
Vehicle fitment
It fits the 1995–2002 Ford Explorer, the 1995–2002 Explorer Sport and the 2001–2002 Explorer Sport Trac.
The Sport Trac fit is limited to 2001 and 2002, and the Explorer fit ends at 2002. Later Explorers use a different design, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
- The studs are not included, so plan on supplying wheel studs when the shaft is fitted.
- Confirm the 31-spline count against your rear differential before ordering.
What’s included
One passenger-side rear axle shaft (95-2013-007).
Not included: wheel studs for the 95-2013-007.







