Overview
The G2 Axle and Gear ring and pinion set, part number G/22-2156-488, is a rear gear set with a 4.88 ratio for the Toyota 8.75 inch rear axle. Ring and pinion gears set the final drive ratio between the driveshaft and the axle shafts.
The G2 Performance Ring & Pinion line is marketed for owners running oversized tires or high performance engines. No vehicle model or model years are given with this rear set, so use the axle details to check fit before ordering.
Key features
- Rear axle gear set for the Toyota 8.75 inch axle
- 4.88 gear ratio
- It is designed to handle oversized tires and high performance engines.
- Manufactured with newer technology and materials
- G2 presents the set as quiet running and strong
Rear gear ratio and tire size
A rear gear ratio affects how the drivetrain pulls away and how it cruises, so the tire size and the vehicle’s overall gearing should be considered together. Larger tires reduce the effective gearing, which can make a lower ratio feel slower. Before ordering, confirm the current ratio and the tire diameter in use.
Rear gear sets are usually installed with new pinion and carrier bearings, and the old bearings are inspected for play and roughness. Pinion depth and backlash need measurement, and a break-in period helps the new teeth seat evenly. Keep the setup consistent with any upgrade to the axle or brakes.
- Tire diameter and overall gearing
- Pinion and carrier bearings
- Backlash and pinion depth
- Break-in period after setup
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/22-2156-488 |
| Axle location | Rear |
| Axle type | Toyota 8.75 |
| Gear ratio | 4.88 |
Vehicle fitment
No model years are attached. The axle reference is Toyota 8.75 in a rear location. The Universal Fit label does not identify any vehicle, so match the axle to your rear differential before ordering.
A rear 8.75 set is not the front IFS unit, so do not substitute one for the other. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear gear sets call for specialist setup of backlash, gear mesh and contact pattern, and most installers run a break-in period once the new set is in. Plan on professional installation for this part.
What’s included
Only the ring and pinion set is named as the item.
Not included: Pinion bearings, shims, carrier parts and fluid need to be sourced separately.
















