Overview
The G2 Ring and Pinion Set for the Dana 35 and M190 rear axles, part number 2-2149-456, is a 4.56 ratio gear set for the rear Dana 35 and M190 axles. The axle housing under your vehicle decides whether the set applies.
A 4.56 ratio means the pinion turns 4.56 times for each full turn of the ring gear. G2 says its ring and pinion sets are designed for oversized tires and high-performance engines, with materials and manufacturing methods it describes as the latest available.
Key features
- Rear Dana 35 axle set, also fitting the M190 axle
- 4.56 gear ratio
- Matched ring gear and pinion supplied as one set
- Designed for oversized tires and high-performance engines
Choosing a gear ratio
A ratio sets how much the engine speed is multiplied at the wheels. A numerically higher ratio gives quicker acceleration and more pulling force at low speed, at the cost of higher engine revs on the highway. Taller tires push the engine speed up further, so the ratio and tire size should be chosen together.
Gear sets are usually changed along with other drivetrain parts. Check the pinion bearings, carrier bearings and pinion seal when the ring and pinion is replaced, since worn parts can affect gear mesh and noise. A rear axle that is being opened is also a good time to inspect the differential for wear.
- Confirm the axle is a Dana 35 or M190 before ordering
- Match the new gears with the matching pinion and ring
- Replace the carrier bearings and pinion seal when the gears are changed
- Check the axle fluid type before refilling
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2149-456 |
| Axle location | Rear |
| Axle type | Dana 35 / M190 |
| Axle manufacturer | Dana |
| Gear ratio | 4.56 |
| Fitment type | Universal fit (per G2) |
Vehicle fitment
The set applies to rear Dana 35 and M190 axles, so the axle housing under your vehicle decides whether it applies.
Confirm your vehicle’s year, model and trim before ordering, and check that the rear axle is a Dana 35 or an M190.
Installation notes
The ring and pinion are supplied as a matched pair, so do not mix them with gears from another set.
What’s included
A ring and pinion set. Shims, bearings and other hardware are not included.

















