Select your vehicle
-13%

G2 Ring and Pinion Set, Dana 44 / M220 Rear 4.56 Ratio – 2-2152-456

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Dana 44 and M220 rear ring and pinion set, 4.56 ratio, part 2-2152-456
  • Rear axle position
  • Popular axle manufacture Dana

Description

Overview

The G2 Ring and Pinion Set, Dana 44 / M220 Rear 4.56 Ratio, part 2-2152-456, is a rear gear set at 4.56 for the Dana 44 and M220 rear axle.

The performance sets are built for oversized tires and high performance engines, using current materials and manufacturing methods. This set is made for demanding rear applications and runs a 4.56 ratio.

Key features

  • 4.56 gear ratio
  • Rear axle position
  • Designed for oversized tires and high performance engines

Rear axle wear signs

The rear axle carries drive torque to both wheels, so the ring and pinion sees steady load on every trip. Wear usually shows first as a change in noise. A rising whine that holds steady through a corner or a clunk when shifting from drive to coast can point to tooth wear or loose carrier bearings, and both should be inspected before the vehicle is driven hard.

Oil condition is the other early clue. Fine metal on a drain plug magnet, a burnt smell, or dark grit suggests the gears or bearings are shedding material. Because rear axle work touches the pinion seal, carrier bearings and pinion preload together, a complete check after any gear change protects the new set and helps the axle last.

  • Listen for whine that changes with load
  • Check for metal particles on the drain plug magnet
  • Look for leaks at the pinion seal and cover

Specifications

Brand G2 Axle and Gear
Part number 2-2152-456
Axle location Rear
Axle type Dana 44
Gear ratio 4.56
Popular axle manufacture Dana

Vehicle fitment

Universal fit is listed, but no vehicle is named. Confirm the Dana 44 or M220 rear application before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The rear pinion preload and carrier bearings have to be set on this set before break-in, so have the install checked by someone who sets gears regularly.

What’s included

One ring and pinion set.

Questions & Answers

Is the G2 2-2152-456 a rear gear set?

Yes. It is a rear gear set for the Dana 44 and M220 axles, in the rear axle position only, not the front.

What is the gear ratio?

It is 4.56, the gear ratio of this rear Dana 44 and M220 set from G2 Axle and Gear. The set is built for oversized tires, so it suits larger rear-end builds.

Does it cover the M220 rear?

Yes. The set is built for both the Dana 44 and the M220 rear axle, so it covers the rear position on either housing type.

Should the rear pinion seal be replaced during a gear install?

Usually, yes. The pinion has to be pulled and reset during a gear change, which often disturbs the seal lip. An old seal may leak once preload is changed, so inspect the lip and the yoke surface first, then replace the seal if either shows wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon