Overview
The G2 Ring and Pinion Set, Dana 44 / M210 Front 4.88 Ratio, part 2-2151-488R, is a front gear set at 4.88 for the Dana 44 and M210 front axle.
G2 describes its performance gear sets as engineered for oversized tires and high performance engines, with materials and manufacturing methods that it says give strong, quiet running.
Key features
- 4.88 gear ratio
- Front axle position
- Designed for oversized tires and high performance engines
Oversized tire gear planning
Oversized tires pull harder on the gears than stock sizes do. Larger tires change the effective gearing, so a 4.88 set will feel different on the trail than on the highway. Measuring tire diameter and deciding on the final ratio before buying the set avoids surprises later.
High performance engines add torque to the front gears, which is why setup matters. Pinion depth, preload and backlash must be right, and the carrier bearings should be in good condition. A shop that regularly sets up gear sets can check tooth contact and confirm the pattern before the vehicle goes back on the road. Expect the speedometer to read differently after the ratio change. Plan to recheck the setup after the first few trail runs.
- Measure tire diameter before choosing the ratio
- Have the carrier set up by a gear shop
- Recheck the setup after the first few runs
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2151-488R |
| Axle location | Front |
| Axle type | Dana 44 |
| Gear ratio | 4.88 |
| Popular axle manufacture | Dana |
Vehicle fitment
Universal fit is listed, but no vehicle is named. The set is for the front Dana 44 or M210 at 4.88, so match both before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gears at 4.88 need the pinion set to the right depth and the carrier preload set before break-in. Have the setup done by a shop that works with gear sets.
What’s included
One ring and pinion set.

















