Overview
The G2 Ford 8.8-inch replacement axle shaft, part G/295-2013-008, is a driver-side rear shaft with 31 splines. It is made for the 1995–2002 Ford Explorer, the 1995–2002 Ford Explorer Sport and the 2001–2002 Ford Explorer Sport Trac.
G2 forges the shaft from high-grade alloy steel and heat treats it to exceed OEM specifications. The brand adds rolled splines and better materials, which it says are meant for owners who run larger tires. Wheel studs are not included with the shaft.
Key features
- 31-spline rear shaft for an 8.8-inch Ford axle
- Forged from high-grade alloy steel, heat treated
- Rolled splines and higher-grade materials.
- Driver-side position, direct fit for the listed Explorer models
Wheel studs and installation prep
A driver-side rear shaft is installed through the axle tube, and the hub, bearing and retainer are removed to reach it. Before pulling the old shaft, check the axle seal and bearing for leaks or roughness, since the same job is the easiest time to address them. Clean the axle tube and check that the side gear splines are not worn.
Wheel studs are a separate consideration. If the vehicle’s studs are worn, stripped or bent, replacing them while the hub is open avoids a second job. Use the correct torque procedure for the wheel nuts after the wheels are on and recheck them after the first few drives. Larger tires put more load on studs, so inspect them before any tire change.
- Check the axle seal while the shaft is out
- Inspect wheel studs for thread damage
- Confirm the spline count before installation
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/295-2013-008 |
| Axle type | Ford 8.8 inches |
| Axle location | Rear |
| Shaft position | Driver side |
| Spline count | 31 splines |
| Wheel studs | Not included |
Vehicle fitment
Installs on the driver side of the 1995–2002 Ford Explorer and Explorer Sport, and the 2001–2002 Explorer Sport Trac.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One driver-side axle shaft.
Not included: Wheel studs.
Installation notes
Because wheel studs are not supplied, plan to reuse the studs already on the vehicle or buy replacements before the shaft is installed.









