Overview
The G2 Axle & Gear Hammer Front Differential Cover (M210/Dana 44, bronze, part 40-2151BR) is a bronze cast nodular iron front cover for the M210 Dana 44 front axle, with fitment entries for Jeep Wrangler JL and Gladiator JT.
Thin stock covers bend when they meet rock edges, which G2 says can damage the ring gear or open a leak. The Hammer cover adds thickness with ramped extrusions along its lower third, and its flush fill plug is magnetized to keep metal flakes out of the oil.
The M210 cover is designed to protect the Dana 44 front differential from the same kinds of impacts. G2’s ramped extrusions add thickness on the bottom third, where rock contact is most likely, while the fill plug is set flush so it stays out of the way. The magnetized plug catches metal flakes that the gears shed, and the bronze UV-stable powder coat is intended to resist corrosion. Together those features make the cover a sturdier alternative to a thin factory cover when the vehicle sees hard use.
Key features
- Cast and machined nodular iron body
- Ramped lower third that helps the cover slide over obstacles
- Flush fill plug, magnetized
- Magnetic zero-leak plug
- Reinforced design for added strength
- UV-stable bronze powder coat
Front axle protection on trails
The front differential sits low and is exposed to rock strikes on steep or rocky trails. A stock cover is thin, and a hard hit can bend it, which can crack the seal and drop the fluid level. A thicker cover with a ramped lower edge is designed to deflect rock contact rather than catch on it, and a flush, magnetized fill plug keeps the fill point out of the way while catching metal flakes from the gears.
Protection works best as part of a full plan. Check the front axle for dents, oil seeps and loose bolts after each trail outing, and keep the fluid level within the range for your axle. Skid plates protect the oil pan and other low components, so the cover and plate serve different jobs. Plan both if the vehicle sees regular rock crawling.
- Check for fresh seeps after rock crawling
- Keep the fill plug clean and seated
- Inspect the bolts after each trail run
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2151BR |
| Material | Cast iron (nodular) |
| Finish | Bronze, UV-stable powder coat |
| Axle location | Front |
| Axle type | M210 Dana 44 (JL) |
| Drain plug | Magnetic zero-leak |
| Gasket | Reusable aluminum core |
Vehicle fitment
The fitment entries include 2018 to 2020 Jeep Wrangler (JL) models, such as Rubicon, Sport, Sport S, Moab, Sahara and Unlimited versions, and the 2020 Jeep Gladiator in its Launch Edition, Overland, Rubicon, Sport and Sport S forms.
The cover fits 2018 to 2020 Jeep Wrangler JL models and 2020 Jeep Gladiator models in the trims covered above. 2021 and 2022 Gladiators fall outside this fit. Make sure your year, model and trim match before buying.
What’s included
A bronze cast iron front cover with a magnetic zero-leak plug and a reusable aluminum core gasket.
Not included: Gear oil.

























