Overview
The G2 Axle and Gear Dana 35 / M190 Rear 5.13 Ratio Ring and Pinion, part number G/22-2149-513, is a rear gear set with a 5.13 ratio for the Dana 35 rear axle. The title pairs the Dana 35 name with the M190 designation.
G2 says its Performance Ring and Pinion sets use current materials and manufacturing methods and are made for oversized tires and high-power engines. The axle type, location and ratio are given, but no vehicle model or year.
Key features
- 5.13 gear ratio
- Rear axle location
- Dana 35 axle type with the M190 designation
- Designed for oversized tires and high-power engines.
Choosing and setting up gears
A rear Dana 35 gear set changes the final drive for the whole axle, so pinion depth and backlash are set by measurement rather than by feel. A shop with a dial indicator and a carrier preload gauge can set these correctly. Mesh that is too tight can overheat the set, and mesh that is too loose can knock under load.
When the housing is open, inspect the carrier bearings, bearing caps and shims for wear or damage. Clean the housing thoroughly, since metal debris from the old gears can damage the new ones. Keep a record of shim thickness so the setup can be repeated if the set is pulled later. Gear oil should be changed after the break-in period.
- Carrier bearing inspection
- Pinion depth and backlash measurement
- Clean housing before reassembly
- Fresh gear oil after break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/22-2149-513 |
| Axle location | Rear |
| Axle type | Dana 35 |
| Axle designation | M190 (from title) |
| Gear ratio | 5.13 |
| Popular axle manufacturer | Dana |
Vehicle fitment
No vehicle list is provided. The set is identified as a rear Dana 35 gear set with a 5.13 ratio, so check those details against your housing first.
This set is for a rear Dana 35 application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear Dana 35 gears need a shop experienced with pinion depth and carrier preload. Break in the set gradually once the setup is finished.
What’s included
This set covers the ring and pinion gears only, with no bearings, shims or seals named.

















