Select your vehicle
-13%

G2 GM 9.5 Inch 14 Bolt Ball Milled Aluminum Cover – 40-2010MB

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 GM 9.5-inch 14 bolt rear differential cover, part number 40-2010MB
  • Heat treated aluminum body that helps cool gear oil
  • Ball milled styling with powder coated finish
  • Extra oil capacity, UPC 631410113112

Description

Overview

The G2 GM 9.5 Inch 14 Bolt Ball Milled Aluminum Cover, part number 40-2010MB, is a rear differential cover for GM 14 bolt 9.5-inch axles. Its heat treated aluminum body is built to take direct hits.

The aluminum body is designed to help cool gear oil, which supports bearing life, and it protects the ring and pinion. The ball milled design gives the rear axle a distinct look.

Key features

  • Heat treated aluminum built to withstand direct hits
  • Designed to help cool gear oil
  • Ball milled styling
  • Powder coated finish
  • Extra oil capacity

Living with a ball milled cover

Ball milled aluminum covers are mostly about appearance and the cooling benefit of a larger, thinner body. The aluminum sheds heat from the gear oil more readily than a steel cover, which helps when the axle runs hot on long grades. The ball milled pattern shows dirt less than a smooth face, but it still needs regular cleaning to keep the finish looking good.

Before fitting a cover like this, inspect the mounting surface for burrs and make sure the gasket seats evenly. Aluminum can be marred by a hard drop, so look for chips around the edge after trail use. If the powder coat wears through, touch it up before corrosion starts to spread across the aluminum.

  • Clean the ball milled surface after muddy runs
  • Inspect the bolt flange for chips
  • Touch up worn powder coat early

Specifications

Brand G2 Axle and Gear
Part number 40-2010MB
UPC 631410113112
Material Heat treated aluminum
Finish Powder coated
Oil capacity Extra capacity
Axle location Rear
Axle type GM 14 Bolt 9.5 Inches
Popular axle manufacturer GM

Vehicle fitment

It is made for GM 14 bolt 9.5-inch axles. Confirm fit for your vehicle’s year, model and trim before ordering.

Other GM axle sizes and bolt patterns are different housings. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Have a gasket and fill plug on hand in case the box does not include them.

SKU: G/240-2010MB Category:

Specification

Shipping weight 15.00 lbs
Package dimensions 13.00 × 13.00 × 5.00 in
brands

Questions & Answers

What axle is 40-2010MB made for?

It is made for GM 14 bolt 9.5-inch rear axles. The cover is an aluminum differential cover with a ball milled design and a powder coated finish.

Does this G2 cover have extra oil capacity?

Yes, its oil capacity is extra. The aluminum body is designed to help cool gear oil, which supports prolonged bearing life.

Will this cover fit my GM 9.5-inch axle?

It is made for GM 14 bolt 9.5-inch axles, so compare your housing with that axle type. Before buying, make sure the year, model and trim match your vehicle.

Do I need to change gear oil when I add a new cover?

Not always, but it is a good time to check it. Drain the old fluid, look for metal debris on the magnet, and refill to the correct level after the cover is set and bolted down.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon