Overview
The G2 Ford 8.8 Inch Aluminum Cover With Load Bolts, part number 40-2013-1AL, is a rear differential cover for Ford 8.8-inch and Mazda 8.8-inch axles. It has a natural aluminum finish.
The cover is made from high strength heat treated aluminum that is designed to handle direct hits. Aluminum covers also help draw heat from the gear oil, which supports longer bearing life.
Key features
- Heat treated aluminum for direct hits
- Helps cool gear oil
- Natural finish
- Extra oil capacity
- Includes load bolts.
Keeping the axle cover in service
Rear covers on 8.8-inch axles mostly protect the ring and pinion from road debris and splash, so the cover is also a useful check point during routine service. Note any fresh oil on the cover face, the bolt heads or the axle tube, since small seeps often start at the gasket line before they become drips.
When you refit a cover, clean the mating face and remove old gasket material completely. Tighten the bolts in a cross pattern so the flange seats evenly. Aluminum flanges can be marked by a stripped or cross threaded bolt, so start each bolt by hand. Load bolt and fill plug threads should be checked for wear before reuse.
- Check fluid level after the first few drives
- Look for seepage after rough trail runs
- Replace the gasket whenever the cover is removed
- Inspect the cover for cracks after any hard impact
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2013-1AL |
| UPC | 631410110258 |
| Material | Aluminum |
| Finish | Natural |
| Oil capacity | Extra capacity |
| Axle location | Rear |
| Axle types | Ford 8.8 Inches, Mazda 8.8 Inches |
| Popular axle manufacturer | Ford |
Vehicle fitment
Fit is based on Ford 8.8-inch and Mazda 8.8-inch axle types, with no year, model or trim attached. Confirm fit for your year, model and trim before buying.
Mazda is named as an axle type here, not as a vehicle model. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Verify the package contents against your installation before starting, including the number of load bolts and any gasket you need.









