Overview
The G2 Ford 9.75 Inch Aluminum Cover (part number 40-2012ALB) is a black aluminum differential cover for Ford 9.75 inch rear axles. It is sized for that axle, so confirm the axle size before ordering.
The cover is cast from lightweight aluminum to dissipate heat and help cool the gear oil, supporting longer bearing life. Reinforcing ribs add rigidity and strength. It is heat treated and shot peened to handle a direct impact, and the seal surface is fully machined for a leak free installation.
Key features
- Cast from lightweight aluminum to dissipate heat
- Reinforcing ribs for added rigidity and strength
- Heat treated and shot peened to handle direct impact
- Fully machined seal surface
- Black powder coat finish
- Extra oil capacity, per the specifications
Choosing a rear cover
A differential cover seals the housing and holds the gear oil that lubricates the ring and pinion, pinion bearings and carrier. Because the cover is the outer skin of the housing, it sees road debris, water splash and direct impacts on the trail. A cover that dissipates heat helps keep the oil in a usable temperature range during towing, hard driving and long grades. Keep the stock fill level and check it after any service.
When a cover is replaced, the old gasket or sealant should be fully removed and the mating surfaces cleaned, since a small nick on the flange is a common cause of seepage. Check the fill and drain plugs for thread damage before tightening them. If the housing has been run low on oil or the gears are noisy, inspect the cover and the bearings before refilling, because overheated oil can leave a dark, burnt smell and residue inside the housing.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2012ALB |
| UPC | 631410111866 |
| Axle location | Rear |
| Axle type | Ford 9.75 in. |
| Axle manufacturer | Ford |
| Material | Aluminum |
| Oil capacity | Extra capacity |
| Finish | Powder coated black |
| Fitment type | Universal fit (per G2) |
Vehicle fitment
The cover is for Ford 9.75 inch rear axles. Confirm the axle size before fitting.
Installation notes
Keep the machined seal surface clean and undamaged before fitting the cover, because that surface is what makes the installation leak free.
What’s included
Check the package contents for a gasket, fill plug and hardware before starting the installation.






























