Overview
The G2 Chrysler 9.25 Inch Aluminum Cover, part number 40-2028AL, is a natural finish rear differential cover for Chrysler 9.25 inch rear axles. It protects the ring and pinion and is designed to help cool the gear oil.
The casting is heat treated and shot peened, and it uses reinforcing ribs for strength. Chrysler is the named axle manufacturer, and no vehicle years, models or trims are given.
Key features
- Lightweight cast aluminum body helps dissipate heat from gear oil
- Reinforcing ribs for rigidity
- Heat treated and shot peened to resist impact
- Machined seal surface intended to limit leaks
- Natural raw aluminum finish
Signs the old cover needs replacing
Rear differential covers protect the ring and pinion from debris and help keep gear oil inside the housing. A cover that is cracked, bent or leaking can let dirt in and oil out, which shortens gear life. Watching for oil stains on the axle, trail grime collecting around the seam and loose bolts gives early warning that the cover needs attention.
When fitting a new cover, clean the housing mating surface thoroughly and check it for nicks. Use a fresh gasket and correct gear oil, and tighten the bolts in a crisscross order. Many owners replace the drain plug and gasket at the same time to avoid a second teardown. After the first few trips, check for seepage around the flange and retighten bolts if needed.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2028AL |
| UPC | 631410111811 |
| Material | Lightweight cast aluminum |
| Finish | Raw natural aluminum |
| Axle location | Rear |
| Axle size | Chrysler 9.25 inch |
| Oil capacity | Extra capacity |
Vehicle fitment
It is made for the Chrysler 9.25 inch rear axle. Measure the housing before ordering, since axle sizes differ.
Measure the housing before ordering, since axle sizes differ. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the bolts, gasket and drain plug are on hand before installing.












