Overview
The cover is cast and machined from nodular iron for M200 and Dana 35 rear differentials. It fits the 2018–2020 Jeep Wrangler JL and the 2020 Jeep Gladiator.
Stamped steel covers can dent or deform when they hit rocks, which can damage the ring gear or start a leak. This cover is made from thicker nodular iron, the same material as the center section of a Jeep axle housing, and is designed to take heavy impacts. Ramped extrusions on the bottom third add thickness where rocks make contact and help the cover slide over obstacles. The cover mounts in place of the factory stamped steel cover, and a gray finish is also available.
Key features
- Cast and machined nodular iron cover
- Ramped extrusions on the lower third angle the cover over rocks
- Flush-mounted fill plug, magnetized to hold metal flakes out of the gear oil
- Magnetic Zero-Leak plug design
- Reusable multi-layered aluminum core gasket for a leakproof seal
- UV-stable bronze powder coat for corrosion resistance
Rear axle cover service
The rear differential holds the ring gear, pinion and carrier, so a cover that resists dents protects the gears and seals. Ramped sections along the bottom edge help the cover clear rocks, but the flush fill plug and bolt layout matter as well. Cover replacement is often done with a fresh gasket and a fluid change.
Look for seepage around the cover, dents and loose bolts after trail runs. Keep the gasket clean and inspect the mating faces before installing. Fill to the correct level and check again after the first drive. Upgrade choices should match the axle type and gear setup.
- Replace the gasket when the cover comes off
- Fill to the correct level after installation
- Check bolts after the first few drives
- Inspect the fill plug for seepage
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/240-2149BR |
| Axle type | M200 / Dana 35 |
| Axle location | Rear |
| Popular axle manufacturer | Dana |
| Material | Cast nodular iron |
| Finish | Bronze powder coat, UV-stable |
| Fill plug | Flush-mounted and magnetized |
| Gasket | Reusable multi-layered aluminum core |
Vehicle fitment
The cover suits non-Rubicon models, though Rubicon trims also appear in the fit, so confirm your axle and trim before ordering. It fits the 2018–2020 Jeep Wrangler JL and the 2020 Jeep Gladiator across several trims.
The list has no 2021 or later Gladiators and no JK or TJ Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The reusable multi-layered aluminum gasket provides a leakproof installation. The flush fill plug sits within the cover, keeping it out of harm’s way.
What’s included
The cover includes the reusable multi-layered aluminum gasket and the flush-mounted, magnetized fill plug. Gear oil and cover bolts are needed to finish the install, so check the package contents against your installation before starting.
























