Overview
The G2 Ford 8.8 Inch Ball Milled Aluminum Cover, part number 40-2013MB, is a rear differential cover named for Ford 8.8-inch and Mazda 8.8-inch axles. It has a ball milled look and a powder coated finish.
The cover is made from high strength heat treated aluminum, built to take direct hits. The aluminum helps cool gear oil, which supports bearing life.
Key features
- Ball milled aluminum styling
- High strength heat treated aluminum body
- Powder coated finish
- Extra oil capacity
Ball milled styling and cooling
Ball milled finishes are a styling choice, but the aluminum body underneath does practical work. A cover that sheds heat from the gear oil can help the axle run cooler during climbs and low-speed crawling. Heat is the main enemy of gear oil, so a cooler housing supports longer bearing life when the axle works hard.
Choose a cover that matches the axle housing you have, then check the mounting pattern and flange before buying. Clean the sealing surface, replace the gasket when the cover comes off, and watch for seepage after the first few drives. Powder coat can scratch, so touch up small chips early to slow corrosion on the aluminum.
- Measure your housing type before ordering
- Clean the sealing surface before fitting
- Watch for seepage after first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2013MB |
| UPC | 631410113136 |
| Material | Aluminum |
| Finish | Powder coated |
| Oil capacity | Extra capacity |
| Axle location | Rear |
| Axle types | Ford 8.8 Inches, Mazda 8.8 Inches |
| Popular axle manufacturer | Ford |
Vehicle fitment
It is made for Ford 8.8-inch and Mazda 8.8-inch axle types. Compare your housing with those types, then verify the year, model and trim against your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Have a gasket and fill plug on hand in case the box does not include them.
















