Overview
The G2 Axle and Gear 95-2022-001 is a rear replacement axle shaft for the GM 10 bolt 8.6 inch axle in the 1999–2005 GM 1500 pickup. It has 30 splines, a 33.63 inch overall length and 14mm press-fit wheel studs.
It is forged from high grade alloy steel and heat treated. It can be used on the driver or passenger side of the rear axle.
The 95-2022-001 is a longer shaft than most in this G2 Axle and Gear family, at 33.63 inches overall, and it is made for the 8.6 inch axle of late-1990s and early-2000s GM half-ton trucks. With 30 splines and 14mm press-fit studs, it fits either side. G2 says its shafts are forged and heat treated beyond OEM specifications.
Key features
- 30 splines
- 33.63 inch overall length
- 14mm press-fit wheel studs
- Either driver or passenger side
- GM 10 bolt 8.6 inch rear axle
- Wheel studs not included
Length and axle size
Overall length is one of the first things to compare on an 8.6 inch rear axle shaft. A longer shaft fits a different axle housing or hub spacing than a shorter one, so measure the old part from end to end before ordering. Check the axle size on the housing cover too, since axles of similar appearance can take different shafts.
Trucks of this era often carry 14mm studs in the flange, which should be pressed in straight and checked for seating. Heavier wheels and larger tires add load to the shaft and the bearing, so inspect the bearing and seal when the shaft is out. Look for cracked or rounded splines, grease at the hub, and a wheel that moves when rocked. Tighten the lug nuts in a star pattern and recheck after the first short drive.
- Measure the old shaft end to end before ordering
- Check the axle size on the housing cover
- Inspect the flange for straight stud seating
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2022-001 |
| UPC | 631410106077 |
| Product type | Replacement axle shaft |
| Axle type | GM 10 Bolt 8.6 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 30 |
| Overall length | 33.63 inches |
| Press-fit wheel stud size | 14mm |
| Wheel studs | Not included |
| Stated application | 1999-2005 GM 1500 |
Vehicle fitment
It fits the 1999–2005 Chevrolet Silverado 1500 and the 1999–2005 GMC Sierra 1500.
The list names the 1500 models only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check the axle size is 8.6 inch before installing.
- 14mm studs are not included.
What’s included
One rear axle shaft that fits either side (95-2022-001).
Not included: 14mm wheel studs for the 95-2022-001.









