Overview
The G2 Axle and Gear 95-2012-001 is a Ford 9.75 inch rear passenger side axle shaft with 34 splines and a 5 on 135mm bolt pattern for the 1997–1999 Ford F-150 and Expedition and 1998–1999 Lincoln Navigator. G2 says its shafts are forged from high grade alloy steel and heat treated to exceed OEM specifications, built for high torque and for the faults of factory shafts. Big Spline options and rolled splines are part of the line.
The 95-2012-001 uses 12mm press fit wheel studs and is sold without them. It is the passenger side shaft for the Ford 9.75 inch rear axle. The 95-2012-001 is a Ford 9.75 inch axle shaft for late-1990s Ford trucks and SUVs, and it uses a 5 on 135mm bolt pattern. Its stud size is the detail that separates it from the later versions, 95-2012-003 and 95-2012-004. Because the F-150, Expedition and Navigator are all listed, this is a useful part for owners of any of those vehicles who want a stronger rear shaft. G2 sells the shaft without studs. G2 lists three vehicles for it, so Expedition owners can use the same part number as F-150 owners.
Key features
- Passenger side rear axle shaft for the Ford 9.75 inch axle
- 34 splines
- 5 on 135mm bolt pattern
- 12mm press fit wheel studs
- Forged from high grade alloy steel.
- Heat treated to exceed OEM specifications.
Stud size and bolt pattern
Bolt pattern and stud size work together to set how a wheel mounts to a hub. A 5 on 135mm pattern is wider than many older patterns, so hub and wheel compatibility should be confirmed before the shaft is installed. The 12mm press fit studs on this shaft must be pressed fully into the flange so the wheel seats correctly.
Stud size is also a practical check when buying parts for a late 1990s truck, since different shafts use different stud diameters. Mixing a shaft with the wrong studs can cause wheels to walk loose, so the studs should match the hub and the lug nut in use.
- Measure the hub bolt pattern before ordering
- Confirm the stud diameter on the old shaft
- Torque lug nuts after the first drive
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2012-001 |
| UPC | 631410105872 |
| Axle manufacturer | Ford |
| Shaft location | Passenger Side |
| Axle position | Rear |
| Axle type | Ford 9.75 Inches |
| Position | Rear |
| Spline count | 34 Splines |
| Bolt pattern | 5 on 135mm |
| Wheel stud size | 12mm press fit |
| Material | High grade alloy steel, forged |
| Applications noted | 1997-1999 F150/Navigator/Expedition |
Vehicle fitment
It fits three SUV and truck lines.
- 1997–1999 Ford Expedition (Eddie Bauer, XLT)
- 1997–1999 Ford F-150 (Base, Lariat, XL, XLT)
- 1998–1999 Lincoln Navigator (Base)
Coverage is 1997–1999 for the F-150 and Expedition, and 1998–1999 for the Navigator. The versions with larger studs are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear axle shaft.
Not included: wheel studs.







