Select your vehicle

G2 GM 7.5 Inch 10 Bol t90-03 Astro Van Replacement Axle Shaft – 95-2015-004

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • GM 10 bolt 7.5 inch rear axle shaft, part number 95-2015-004
  • Driver or passenger side, 28 splines
  • Forged alloy steel, rolled splines

Description

Overview

The G2 Axle and Gear 95-2015-004 is a rear axle shaft for GM 10 bolt 7.5 inch axles, with 28 splines, for the driver or passenger side. The title also names an Astro Van with 90-03 model years, but no vehicle fitment is confirmed for that vehicle.

G2 describes forged alloy steel construction, rolled splines and heat treatment beyond OEM specifications. Check your axle size and side before ordering.

Key features

  • Driver or passenger position on GM 10 bolt 7.5 inch axles
  • 28 spline count
  • Forged alloy steel
  • Rolled splines and big spline options

Measuring your axle

Before buying a replacement shaft, measure the axle housing and count the splines on the shaft you are removing. Axle size, spline count and side must all match, because a shaft with the right length but the wrong spline pattern will not seat correctly in the differential or the hub. Rear axles on GM trucks and vans often share a housing design, so the axle code stamped on the tube or cover is a useful check.

Replacement shafts are usually sold with a single side, so note whether your vehicle needs a driver or passenger part. When the shaft is out, look at the bearing, seal and retainer. These parts often wear at a similar rate, and replacing them at the same time avoids a second teardown.

  • Count the spline teeth before ordering
  • Measure the housing size and check the axle code
  • Note the side needed for your vehicle
  • Inspect the bearing and seal during removal

Specifications

Brand G2 Axle and Gear
Part number 95-2015-004
UPC 631410106374
Axle type GM 10 Bolt 7.5 Inches
Axle location Rear
Shaft location Driver or passenger
Axle spline 28 splines
Popular axle manufacturer GM

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering, using the GM 10 bolt 7.5 inch axle type as the reference.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Only the rear axle shaft is included. Check the package contents against your installation before starting.

SKU: G/295-2015-004 Category:

Specification

Shipping weight 22.00 lbs
Package dimensions 37.00 × 7.50 × 7.30 in
brands

Questions & Answers

Does this G2 shaft fit an Astro Van?

Confirm fit for your Astro Van's year, model and trim before ordering. Match the GM 10 bolt 7.5 inch axle type and 28 spline count to your housing.

What axle type is this shaft for?

It is made for GM 10 bolt axles at 7.5 inches, in the rear location, with 28 splines. It can be fitted on the driver or passenger side.

What is the part number and UPC?

The part number is 95-2015-004 and the UPC is 631410106374. The brand is G2 Axle and Gear. Confirm your vehicle's year before ordering.

Can a shaft be upgraded without changing the axle housing?

Often yes, if the new shaft keeps the same axle type and spline count. Check that the housing size and bearing fit match the new part before installing it. Mismatched parts can cause noise or early failure.

What should I check if the rear axle is noisy after a shaft swap?

Check that the shaft is fully seated and the retainer is tight, then look at the bearing and carrier for wear. Noise from a new shaft often points to a seating or bearing problem rather than the shaft itself.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon