Select your vehicle
-13%

G2 GM 7.5/7.625″ Minor R&P Install Kit – 25-2015A

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear GM 7.5/7.625-inch minor R&P install kit
  • Part number 25-2015A, UPC 631410130324
  • Includes shims, seals and setup compounds
  • No vehicle fitment listed

Description

Overview

The G2 Axle and Gear GM 7.5/7.625-inch Minor R&P Install Kit, part number 25-2015A, is a minor ring and pinion installation kit for GM axles in the 7.5 and 7.625-inch sizes. R&P is shorthand for ring and pinion. UPC 631410130324 identifies the kit.

Its contents cover the pinion side, carrier shims and setup compounds, as itemized below.

Choosing the right seals

Pinion seals and crush sleeves work together. The seal keeps lubricant at the yoke, while the crush sleeve sets bearing preload as the pinion nut is tightened. A new seal on an old, grooved yoke can still leak, so inspect the yoke surface before installing the seal. Seal lip contact should be clean and free of nicks.

Carrier and pinion bearings deserve the same attention during a GM 7.5 or 7.625 rebuild. Worn bearings can produce noise that resembles gear wear, so checking them early avoids a second teardown. Keep bearings clean, pack them lightly with gear oil, and set preload with the proper tools.

  • Inspect the yoke for grooves before fitting a seal
  • Use a new crush sleeve every time
  • Check bearings before blaming the gears

Specifications

Brand G2 Axle and Gear
Part number 25-2015A
UPC 631410130324
Kit type Minor
Axle size GM 7.5/7.625-inch

Vehicle fitment

It is for GM axles in the 7.5-inch or 7.625-inch sizes. Check year, model and trim against your vehicle before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit includes silicone sealer and gear marking compound for setup. Pinion depth and preload adjustments are best left to a professional gear technician.

What’s included

  • Pinion nut
  • Pinion seal
  • Crush sleeve
  • Pinion shims
  • Carrier shims
  • Ring gear bolts
  • Thread locking compound
  • Gear marking compound
  • Silicone sealer
SKU: G/225-2015A Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Questions & Answers

Does 25-2015A fit a 7.5-inch GM axle?

The kit is for GM 7.5/7.625-inch axles. Confirm the housing size before ordering, and check year, model and trim against your vehicle.

What compounds come with the kit?

Thread locking compound, gear marking compound and silicone sealer come with the kit. Each is used during setup, so follow the curing and use guidance printed on its container.

Is the kit complete for a full rebuild?

A full rebuild also depends on the gear set and bearings you are using. Check the contents against your job before starting.

Should I replace the pinion seal when rebuilding?

Yes, in most rebuilds. A new pinion seal prevents leaks at the yoke and works well with a fresh crush sleeve. Inspect the yoke surface for grooves before installing it.

What is a crush sleeve for?

A crush sleeve is a spacer that compresses as the pinion nut is tightened, setting bearing preload. It is used once, so a new one should go in with each pinion removal.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon