Overview
The G2 Axle and Gear 25-2054 is a Dana 50 minor ring and pinion installation kit for the front axle. It supplies the install parts for a Dana 50 front differential gear swap where the existing bearings stay in service.
Per G2, the kit is designed for the installer working on a newer vehicle and includes parts that are hard to find: a proper shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Key features
- Dana 50 front axle installation kit
- Minor kit, no bearings listed
- Shim kit for gear mesh setup
- Pinion nut, crush sleeve and pinion seal
- Ring gear bolts, sealer and Loctite
- Gear marking compound included
Before you buy
The Dana 50 is a heavy front axle, and a gear change on it is a larger job than the same work on a light-duty axle. Before ordering, confirm that the axle under the vehicle is a Dana 50 and not a Dana 60 or Dana 70. Inspect the ring gear and pinion teeth for chips, pitting or uneven wear, because the kit does not include gears. Any damaged set should be replaced before the install starts.
Plan for the parts that come with the kit and those that do not. Gears, bearings and gear oil are needed for a complete job, and the setup relies on careful shim work and a clean pattern check. A professional gear setup is a sensible choice on this axle, especially for a first-time install.
- Confirm the axle is a Dana 50 front unit
- Inspect gear teeth before reassembly
- Budget for gears, bearings and gear oil
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2054 |
| UPC | 631410095210 |
| Product type | Minor ring and pinion installation kit |
| Kit class | Minor kit |
| Axle manufacturer | Dana |
| Axle type | Dana 50 |
| Axle location | Front |
| Kit contents | Shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite, gear marking compound |
Vehicle fitment
No vehicle list is given for the 25-2054. G2 labels it Universal Fit and names the Dana 50 front axle as the part it is made for, so match the axle in your front end.
The 25-2054 does not cover Dana 60 or Dana 70 axles, nor any rear axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setting the pinion with shims and then reading the pattern with marking compound is the usual order of work with this kind of kit. Because the 25-2054 has no gears in it, a professional gear setup is advisable on the Dana 50. The crush sleeve is a single-use part that sets pinion bearing preload, so a new one comes in the box. Loctite keeps the ring gear bolts from backing out. Gear oil is needed to refill the differential afterward, and new gears deserve a careful break-in.
What’s included
- Shim kit
- Replacement pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite
- Gear marking compound
Not included: the gear set and bearings.







