Overview
The G2 Axle and Gear 95-2015-007 is a replacement rear axle shaft for GM 10 bolt axles with a 7.5 inch axle type. It fits the driver or passenger side.
G2 forges this shaft from high grade alloy steel and heat treats it to exceed OEM specifications. The design aims at high torque builds and larger tires, with rolled splines, better materials and Big Spline options.
Key features
- Forged from high grade alloy steel
- Heat treated to exceed OEM specifications
- Rolled splines and better materials for high torque use
- Big Spline options for running larger tires
- 28 splines on the rear axle shaft
Spline count and axle swaps
Swapping axle shafts is common on GM 10 bolt rears, especially when tire size or torque output changes. The spline count is the first thing to confirm, because the shaft must mesh with the side gear inside the differential and the hub on the wheel end. A shaft with a matching length but a different spline pattern can slip or wear the gear quickly.
Heavier tires and higher torque put more load on the splines and the bearing. When upgrading, look at the whole driveline, including the pinion, the carrier bearing and the brake parts on the wheel end. Replacing one shaft while the rest of the axle is worn can leave the new part working harder than it should.
- Confirm the spline count on both shafts
- Check the side gear and pinion for wear
- Inspect the wheel bearing and brake hardware
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2015-007 |
| UPC | 631410106152 |
| Axle type | GM 10 bolt, 7.5 inch |
| Axle location | Rear |
| Shaft location | Driver or passenger |
| Spline count | 28 splines |
| Material | High grade alloy steel |
| Heat treatment | Heat treated to exceed OEM specifications |
Vehicle fitment
This is a Universal Fit shaft with no vehicle list. Confirm fit for your vehicle’s year, model and trim before ordering, including any 98-02 Camaro application.
Other GM axle types and sizes are not covered by this 7.5 inch description. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Count the splines on your existing shaft and check the axle type before you select this one, since it is listed at 28 splines. Support the vehicle on stands before working underneath it.
What’s included
Check the package contents for bearings, seals and retaining hardware against your installation before starting.







