Overview
The G2 Axle and Gear 95-2025-202 is a one piece replacement axle shaft for the AMC 20 rear axle in Quadratrac-equipped 1976–1981 Jeep CJ models, made for the passenger side. It has 29 splines.
G2 designs this shaft for Jeeps equipped with its one piece axle kit. The steel is forged from high grade alloy and heat treated to exceed OEM specifications.
The 95-2025-202 is the passenger-side one piece shaft for Quadratrac CJs, carrying 29 splines on the AMC 20 axle. G2 Axle and Gear’s vehicle list names the CJ5, CJ7 and Scrambler, and the company says its shafts are heat treated to exceed OEM specifications. Confirm that your Jeep matches the Quadratrac and one piece axle kit wording before installing.
Key features
- One piece AMC 20 rear axle shaft
- 29 splines
- Passenger-side position
- 76-81 CJ Quadratrac application
- Heat treated alloy steel
- For use with the one piece axle kit
Axle shaft wear signs
A rear axle shaft carries engine torque from the differential to the wheel, so it sees the most stress when the Jeep accelerates hard, climbs or crawls under load. On a CJ with an AMC 20 axle, a worn or bent shaft often shows up as a vibration, a clunk when shifting between drive and coast, or a wheel that wobbles at the hub. Inspect the splines for rounding or pitting and look for cracks near the flange, since those are the spots that fail first.
When replacing one side, check the opposite shaft and the carrier bearings at the same time. Shafts with heavy wear often come out of the same axle at similar mileage, and labor is the costly part of the job. Keep the bolts and retainers clean, and use fresh gasket material where the old one was damaged.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2025-202 |
| UPC | 631410096712 |
| Product type | Replacement axle shaft |
| Axle type | AMC 20 |
| Axle location | Rear |
| Shaft position | Passenger Side |
| Spline count | 29 |
| Stated application | 76-81 Jeep CJ Quadratrac w/One Piece Axle Kit |
Vehicle fitment
It fits the 1976–1981 Jeep CJ5, the 1976–1981 Jeep CJ7 and the 1981 Jeep Scrambler.
G2 specifies Quadratrac models only, and the Scrambler appears for 1981 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check that your CJ has Quadratrac and the one piece axle kit.
- Match the 29 splines to your differential.
What’s included
One passenger-side one piece axle shaft (95-2025-202).
Not included: The axle kit and wheel studs are not included.







