Overview
The G2 Axle and Gear 95-2015-002 is a rear axle shaft for the GM 10 bolt 7.5 inch axle, described by G2 as made for the 1988–1994 S10 4WD. It has 28 splines and fits either the driver or passenger side.
The shaft is forged from high grade alloy steel and heat treated. It is designed for the added load of high-torque use.
The 95-2015-002 is made for the GM 10 bolt 7.5 inch rear axle with 28 splines, and it can be used on either side. It is designed for the added load of high-torque use and for owners running larger tires. Confirm fit for your vehicle’s year, model and trim before ordering, since the year range for S10 trucks needs checking.
Key features
- Either driver or passenger side
- 28-spline shaft
- GM 10 bolt 7.5 inch rear axle
- Confirm year fit for 1988–1994 S10 4WD before ordering.
- Forged and heat treated alloy steel
- Wheel studs not included
Matching the differential
The 28-spline count must match the side gears in the differential, and a mismatch will not seat properly or will chew up the gears quickly. Measure or count the splines on the existing side gears before ordering. Because the shaft fits either side, it can replace a part on the left or right, but the rest of the axle assembly must be checked for each side.
Wear on these shafts often shows up as a clunk when stopping, a leak at the axle seal, or a shaft that moves in and out at the hub. Pull the wheel, and inspect the splines, the bearing and the seal before installing the new part. A clean flange and correct axle nut torque help keep the new shaft in good shape. Older S10 trucks often show corrosion, so cleaning the hub face is worthwhile.
- Count the splines on the existing side gears
- Inspect the axle seal for leaks before reassembly
- Clean the hub face to remove corrosion
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2015-002 |
| UPC | 631410105995 |
| Product type | Replacement axle shaft |
| Axle type | GM 10 Bolt 7.5 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 28 |
| Wheel studs | Not included |
| Stated application | 1988-1994 S10 4 WD |
Vehicle fitment
G2’s vehicle list for the 95-2015-002 shows the 1983–1989 Chevrolet S10.
G2’s title and description say 1988–1994, which conflicts with that list. Contact G2 to confirm the right shaft for your truck’s year before use. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- With 28 splines, the shaft must match 28-spline differential gears.
- Wheel studs are not included and need to be supplied.
What’s included
One rear axle shaft that fits either side (95-2015-002).
Not included: wheel studs for the 95-2015-002.








