Overview
The G2 Axle and Gear 2-2011-583 is a 5.83 ratio ring and pinion for the rear Ford 9 inch axle. It is a universal fit by axle type, so the set is matched to the axle rather than to a specific vehicle.
G2 says its performance sets are built for oversized tires and high performance engines, using the latest technology and materials. A 5.83 ratio gives more torque multiplication at the wheels than lower numerical ratios, and it needs careful setup.
Key features
- 5.83 ratio rear ring and pinion
- Ford 9 inch rear axle type
- Engineered for oversized tires and high performance engines.
- Made with the latest technology and materials.
Gearing for off-road and towing use
A numerically high ratio like 5.83 gives strong low-speed torque for crawling, steep climbs and heavy towing. The trade-off is higher engine speed on the highway and more heat in the axle, so the gearing suits drivers who spend most of their time at lower speeds.
Suspension and tire choices affect how the gearing performs. Larger tires reduce the effective ratio, while heavier loads place more stress on the gear teeth and bearings. Watch the axle temperature on long grades, and carry a spare set of fluid for trail work.
Gear sets this aggressive reward careful upkeep. Inspect the pinion seal, axle breathers and gear oil after hard use, and keep a record of service so changes in noise or temperature are easy to spot.
- Watch axle temperature on long grades
- Inspect pinion seals after trail use
- Keep a service log for gear noise changes
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2011-583 |
| UPC | 631410105506 |
| Gear ratio | 5.83 |
| Axle location | Rear |
| Axle type | Ford 9 inch |
| Popular axle manufacturer | Ford |
Vehicle fitment
It fits the Ford 9 inch rear axle at a 5.83 ratio. Confirm the housing size for your vehicle before ordering.
Only the Ford 9 inch is named for this 5.83 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5.83 set needs pinion depth, backlash and bearing preload set by a driveline shop, followed by a break-in period on the 9 inch carrier.
What’s included
A 5.83 ring and pinion set for the Ford 9 inch.
















