Overview
The G2 Dana 44 4.88 Thick Ratio Ring and Pinion, part number 2-2033-488X, is a 4.88-ratio gear set for Dana 44 front or rear axles. Thick ratio is part of its name.
G2 says its G-2 series gears are designed to run cooler and quieter than normal aftermarket gears, and that G2 makes them under contract with original equipment manufacturers.
Key features
- 4.88 gear ratio (thick ratio)
- Front or rear Dana 44 axle location
- G-2 series design.
Thick ratio considerations
A thick ratio name usually refers to the gear design or the tooth profile, so it helps to compare the gear face and pattern with your current set. For a 4.88 ratio, the pinion depth and carrier preload are key checks. Confirm the setup against the carrier and housing you already have, and avoid mixing parts from different series.
Steady driving helps a new set settle in. Gentle loading during the first miles, followed by a fluid change and a mesh check, gives the gears a good start. A shop can record the contact pattern so you have a reference if noise or wear appears later.
- Compare the gear face and tooth pattern
- Check pinion depth and carrier preload
- Avoid mixing gear series in one axle
- Keep a record of the setup numbers
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-488X |
| UPC | 631410105247 |
| Axle type | Dana 44 |
| Axle location | Rear or front |
| Gear ratio | 4.88 |
Vehicle fitment
It fits Dana 44 front or rear axles and is not tied to one vehicle. Confirm the axle and carrier before installing.
Installation notes
Have a shop with the right tools set the mesh and preload on this thick ratio set before the axle is used.














