Overview
The G2 Axle and Gear 1-2094-373 is a 3.73 ratio O.E.M. series ring and pinion for the GM 7.25 inch IFS front axle. It fits the front location and is matched to the axle type rather than a named vehicle.
The 3.73 set is part of the O.E.M. series, made under contract with original equipment manufacturers. The 3.73 ratio sits between lower and higher numerical options, which makes it a common middle choice.
Key features
- O.E.M. series 3.73 ring and pinion
- GM 7.25 inch IFS front axle type
- Front axle location
- Made under contract with original equipment manufacturers.
- Runs cooler and quieter than aftermarket gears.
Choosing between ratios
A 3.73 ratio is a middle-of-the-range choice for many front axles. Compared with a lower numerical set, it adds more torque multiplication at low speed, which helps with heavier tires or added weight. The trade is slightly more engine speed on the highway and a little more heat in the front differential during long pulls.
Before ordering, measure the tire diameter and think about how the vehicle is used most often. Ratio changes also affect speedometer readings, so check accuracy after the change. Front gears wear most when setup is off, so the contact pattern and backlash should be verified before the vehicle returns to regular use. Keep the front differential fluid fresh and check for leaks around the pinion seal after the first few drives.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2094-373 |
| UPC | 631410093063 |
| Gear ratio | 3.73 |
| Axle location | Front |
| Axle type | GM 7.25 inch IFS |
| Popular axle manufacturer | GM |
| Series | O.E.M. |
Vehicle fitment
The set is matched to the GM 7.25 inch IFS at a 3.73 ratio. Confirm the axle type before ordering.
Only the GM 7.25 inch IFS is named for this 3.73 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A driveline shop should set pinion depth, backlash and bearing preload on the IFS 3.73 gears, followed by a break-in period.
What’s included
A matched O.E.M. series ring and pinion for the 7.25 inch IFS front axle.
















