Select your vehicle
-13%

G2 Toyota Land Cruiser 9.5 Inch 5.29 Ratio Ring and Pinion – 2-2044-529

G2 Axle and Gear

Shop G2 Axle And Gear Ring And Pinions on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front or rear Toyota 9.5 in. axle gear set
  • 5.29 gear ratio
  • Built for oversized tires and high-performance engines
  • Part number 2-2044-529

Description

Overview

The G2 Toyota 9.5 Inch 5.29 Ratio Ring and Pinion (part number 2-2044-529) is a gear set for Toyota 9.5 inch axles, for the front or rear position. Check the axle size against your vehicle before fitting.

G2 says its ring and pinion sets are intended for applications with oversized tires and high-performance engines. This 5.29 ratio set changes how the axle multiplies engine torque at the wheels, so it should be chosen with the rest of the driveline in mind.

Key features

  • 5.29 gear ratio
  • Toyota 9.5 in. axle type
  • Front or rear axle location
  • Intended for oversized tires and high-performance engines.

Choosing a 9.5 inch setup

A Toyota 9.5 inch axle is a heavy-duty unit, and the ring and pinion decides how it multiplies engine torque at the wheels. A 5.29 ratio gives more pull at low speed, which suits larger tires and off-road use, but it also raises engine speed on the highway. Tire diameter and transmission gearing should be considered together with the gear choice.

Before fitting a new gear set, look over the carrier, pinion bearings and housing for wear or cracks. Setting mesh and preload is shop work, and a proper break-in should follow the install. Keep the gear oil fresh after the first trips, and check the cover and seals for leaks.

  • Inspect the carrier and pinion bearings
  • Check tire diameter against the gear ratio
  • Plan a break-in before hard use

Specifications

Brand G2 Axle and Gear
Part number 2-2044-529
UPC 631410105636
Axle manufacturer Toyota
Axle type Toyota 9.5 in.
Axle location Front or rear
Gear ratio 5.29
Fitment type Universal fit (per G2)

Vehicle fitment

It is made for Toyota 9.5 inch axles at the front or rear. Confirm the axle size on your vehicle before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Setting the mesh and preload on a ring and pinion is shop work, and the set should go through a proper break-in after installation.

What’s included

The ring and pinion set is the item supplied. Shims, bearings and carrier hardware need to be sourced separately.

SKU: G/22-2044-529 Category:

Specification

Shipping weight 35.00 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Is the G2 2-2044-529 a Land Cruiser ring and pinion?

It is a Toyota 9.5 inch ring and pinion for the Land Cruiser. Confirm the year and axle size before fitting.

What ratio does it use?

It is a 5.29 ratio. The ratio is the number of times the pinion turns for each full turn of the ring gear.

Can it go in the front or the rear?

The set fits either the front or the rear Toyota 9.5 inch axle position. Confirm which axle your vehicle uses, front or rear, before ordering.

Can a ring and pinion be swapped without new bearings?

Usually new pinion and carrier bearings are installed with the gear set, because worn bearings can change gear mesh. Reusing old bearings is a shop decision, so have the gears set by a qualified installer.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop G2 Axle And Gear Ring And Pinions on Amazon