Select your vehicle
-13%

G2 Ring and Pinion Set, Dana 30 / M186 Front 5.38 Ratio – 2-2050-538R

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front ring and pinion set, Dana 30 / M186, 5.38 ratio, part G/22-2050-538R
  • Front axle location with Dana 30 axle type
  • Designed for oversized tires and high-power engines.
  • No vehicle models or years are named

Description

Overview

The G2 Axle and Gear Dana 30 / M186 Front 5.38 Ratio Ring and Pinion, part number G/22-2050-538R, is a front gear set with a 5.38 ratio for a Dana 30 front axle. The title pairs the Dana 30 name with the M186 designation.

G2 builds this ring and pinion set for oversized tires and high-power engines. Confirm the front axle type and 5.38 ratio against your housing before ordering, since no vehicle model or year is attached to this set.

Key features

  • 5.38 gear ratio
  • Front axle location
  • Dana 30 axle type with the M186 designation
  • Intended for oversized tires and high-power engines.

Things to check first

A front ring and pinion sets the final drive ratio at the axle, so the gear ratio has to match the housing and the gearing you plan to run. Before ordering, look at the carrier and pinion bearings. If the old gears show pitting, chipped teeth or a whine that changes with load, the set is worn and the rest of the front differential usually needs inspection too.

Gear sets are often replaced together with pinion bearings, crush sleeves or shims, and carrier bearings when the axle is opened. Fresh seals and gear oil are also worth planning for. Fitting new gears into an old carrier can leave them noisy, so ask the installer which parts they expect to reuse.

  • Carrier bearing condition
  • Pinion depth and preload setup
  • Fresh gear oil after break-in
  • Front seals while the axle is open

Specifications

Brand G2 Axle and Gear
Part number G/22-2050-538R
Axle location Front
Axle type Dana 30
Axle designation M186 (from title)
Gear ratio 5.38
Popular axle manufacturer Dana

Vehicle fitment

No vehicle list is provided. The set is identified by the Dana 30 front axle type and 5.38 ratio, and rear axles are not covered.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Mesh and preload adjustments for this Dana 30 set call for a skilled gear technician. Break the set in gradually once the setup is complete.

What’s included

This set includes the ring and pinion gears. Check the package contents against your installation before starting, since bearings and shims may be needed separately.

Questions & Answers

What is G/22-2050-538R?

It is a front ring and pinion gear set for a Dana 30 axle with a 5.38 ratio. The title also includes the M186 designation, which is not expanded on beyond the name.

Is 5.38 the only ratio offered for this set?

Only the 5.38 ratio is given for this part number. Check your current axle ratio and the gear set you need before choosing, because other ratios are not compared here.

Will this set fit a rear Dana 30 axle?

This set is for a front Dana 30 axle location. Confirm your axle location and type against the housing before choosing this part.

Should the pinion bearings be replaced with a new ring and pinion?

Usually yes. Pinion and carrier bearings wear along with the gears, and reusing old bearings can shorten the life of a new set. Check them for roughness and play before the gears go in, and replace them if you have any doubt.

How do I know the front gears need replacing?

Look for a whine that changes with speed or throttle, metal in the fluid, or wear patterns on the teeth when the cover comes off. Any of these signs means the set should be inspected and likely replaced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon