Overview
The G2 Ford 10.25 inch 4.56 ratio ring and pinion, part number 2-2046-456L, is a rear gear set with a 4.56 ratio for Ford rear axles. It is matched to Ford 10.25 inch and 10.5 inch rear axle types.
G2 builds its ring and pinion sets for oversized tires and high performance engines, using current technology and materials. The gear ratio is 4.56.
Key features
- 4.56 gear ratio
- Rear axle location
- Matched to Ford 10.25 inch and 10.5 inch axle types
- It is built for oversized tires and high performance engines.
Choosing a gear ratio
Changing the ring and pinion changes how the axle turns under load. A lower numerical ratio such as 4.56 trades some low-speed pulling power for a lower engine speed at highway pace, while larger tires shift that balance the other way. Before buying, compare the tire diameter you run with the ratio you want, since the two together set how the drivetrain feels on and off the trail.
Ring and pinion sets are often replaced together with pinion bearings, seals and carrier bearings when the axle is opened, because the gears and bearings wear as a system. Inspect the old gears for chipped teeth, pitting and an uneven contact pattern. Any noise, heat or leak after a gear change means the setup should be checked again.
- Confirm the ring gear size of your axle before ordering
- Pair the ratio with your tire diameter
- Plan on a new pinion seal at installation
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-456L |
| UPC | 631410094480 |
| Axle location | Rear |
| Axle manufacturer | Ford |
| Axle types | Ford 10.25 inches or Ford 10.5 inches |
| Gear ratio | 4.56 |
Vehicle fitment
This gear set is matched to Ford 10.25 inch and 10.5 inch rear axles rather than to named vehicles. Check your axle size and the ratio you want before ordering.
No vehicle years or models are given for this set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring and pinion sets need professional setup, including gear mesh and pinion depth, and the gears need a break-in period. Have a qualified shop set up and break in this set.
What’s included
The ring and pinion set. Check the package contents against your installation before starting.
















