Overview
The G2 Axle and Gear 2-2032-488 is a 4.88 ratio ring and pinion for the Dana 30 Standard axle. The pinion turns 4.88 times for each ring gear revolution, a numerically high ratio that multiplies torque at the wheels for larger tires.
G2 makes this set for the Dana 30 Standard axle in front or rear positions. The Performance Ring and Pinion line is made for oversized tires and high-performance engines, using current materials and methods. Confirm the axle type and its carrier on your vehicle before buying.
Key features
- 4.88 gear ratio for the Dana 30 Standard axle
- Fits front and rear axle locations.
- Ring gear and pinion sold as one set
- Designed for oversized tires and high-performance engines.
- Made with current manufacturing methods.
Choosing a gear ratio
A high ratio like this one gives the wheels more turning force for each unit of engine speed, which helps a truck start off with heavy tires or a load. The cost is higher engine speed at highway speed, so the drivetrain works harder on long runs. Drivers often pair a gear change like this with drivetrain parts that suit the new setting.
Tire size is part of the same decision. Larger tires already lower the effective ratio, so the gearing change should be planned with the tire diameter in mind. Shops often check the axle housing and bearings while the cover is off, because a gear swap is a good time to catch wear on other parts.
- Tire diameter changes the effective ratio
- Engine torque and gearing work together
- Check the axle housing for cracks before installing
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2032-488 |
| UPC | 631410093926 |
| Axle type | Dana 30 Standard |
| Axle location | Front or rear |
| Gear ratio | 4.88 |
| Axle manufacturer | Dana |
Vehicle fitment
This 4.88 set matches the Dana 30 Standard axle in front or rear positions. Identify the axle and its carrier on your vehicle first. A different Dana model is not a match for this set.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setting tooth contact and backlash on a Dana 30 gear set is specialist work, and most installers send it to a gear shop. Plan a break-in run before heavy loads.
What’s included
One 4.88 ring and pinion set for the Dana 30 Standard axle, part number 2-2032-488.
Not included: Pinion bearings, carrier bearings and shims are not included with the 4.88 set.















