Overview
The G2 Axle and Gear 2-2046-430-37 is a 4.30 ratio ring and pinion for the Ford 10.5 Inch axle. The pinion turns 4.30 times for every ring gear revolution, a numerically high ratio that multiplies engine torque at the wheels and favors low-speed pulling force.
The Performance line in this set is made for oversized tires and high-performance engines, with current materials and manufacturing methods. The 37 spline count has to match the axle shafts and the carrier on your vehicle, so check both before buying.
Key features
- 4.30 gear ratio for the Ford 10.5 Inch axle
- 37 spline
- Ring gear and pinion supplied together
- Designed for oversized tires and high-performance engines.
- Made with current manufacturing methods and materials.
Setup and break-in
Gear mesh, backlash and carrier preload decide how quietly and how long a ring and pinion runs. Each of those settings needs a measured check, usually with a dial indicator and a bearing preload gauge. Bolts on the ring gear should be torqued to the specification the installer uses, and the mating surfaces should be clean and free of burrs.
Break-in matters on any new set of gears. Easy driving at first lets the tooth surfaces wear into a stable pattern. Avoid hard launches, heavy towing and long highway runs at high speed during this period, and check the fluid level and any noise afterward. Noise that changes with speed or load is a sign to stop and have the setup checked.
- Dial indicator check for backlash
- Tooth contact pattern with marking compound
- Bearing preload measured before final assembly
- Fresh gear oil after the first runs
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-430-37 |
| UPC | 631410142150 |
| Axle type | Ford 10.5 Inches |
| Spline count | 37 (per title) |
| Gear ratio | 4.30 |
| Axle manufacturer | Ford |
Vehicle fitment
This 4.30 set is intended for the Ford 10.5 Inch axle with a 37 spline count, so measure the spline count on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear mesh and carrier preload on a 10.5 inch set need precise measurement, so most installers use a gear shop. Break the set in gradually once installed.
What’s included
One 4.30 ring and pinion set for the Ford 10.5 Inch axle with 37 spline, part number 2-2046-430-37.
Not included: Carrier bearings and shims are not part of the 4.30 37 spline set.









