Overview
The G2 2-2081-538 is a 5.38 ratio ring and pinion for Suzuki axles. It is made for Suzuki 6.875 inch and Suzuki 10 Bolt axle types, in front or rear positions. The pinion turns 5.38 times for each full ring gear revolution, a steep ratio that multiplies torque at the wheels and favors acceleration and low-speed work.
The Performance line is built for oversized tires and high-performance engines, using current materials and manufacturing methods. Confirm your vehicle’s model year and check the axle type and ring gear measurement before buying.
Key features
- 5.38 gear ratio for Suzuki axles
- Suzuki 6.875 inch and Suzuki 10 Bolt axle types listed
- Front or rear axle location.
- Ring gear and pinion sold as one set
- Designed for oversized tires and high-performance engines.
Steep ratios on light trail rigs
A 5.38 ratio is one of the steeper choices for Suzuki axles. It gives the pinion more turns per wheel turn, so the vehicle pulls harder from a stop and climbs with less throttle. The tradeoff is that the engine runs faster on the highway, which means more noise and heat on long drives.
Tire size should guide the choice. Larger tires already lower the effective ratio, so a steeper set can help restore low-speed control. Changing tires and gears together also affects speedometer readings, so check them after the change and confirm the vehicle still shifts smoothly.
Good tooth contact is the goal of setup. Pinion depth, backlash and preload need to be right, or the gears will whine and wear early. Replace the carrier bearings and pinion seal during the same job, and inspect the fluid for metal after the first few drives.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2081-538 |
| UPC | 631410112672 |
| Axle type | Suzuki 6.875 Inches or Suzuki 10 Bolt |
| Axle location | Front or rear |
| Gear ratio | 5.38 |
| Axle manufacturer | Other |
Vehicle fitment
This 5.38 set is made for Suzuki 6.875 inch or Suzuki 10 Bolt axles. Measure the axle type and ring gear size on your vehicle, and confirm fit for your vehicle’s year, model and trim before ordering. Use a different part if your housing is outside those two types.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5.38 set needs careful tooth contact and carrier preload, so a gear shop with setup tools is the usual installer. Break the gears in before sustained use.
What’s included
One 5.38 ring and pinion set for Suzuki axles, part number 2-2081-538.
Not included: Carrier bearings, shims and hardware.















